SOY GEL PROFESSIONAL
PAINT STRIPPER
FOR DECORATIVE CONCRETE

$28.45 Per Quart
$72.05 Per Gallon
$269.32 Per 5 Gallons

Common Uses:

• Concrete Hard Surface Sealer Removal
• Acrylic Removal
• Lead-Based Paint Removal
• Single & Two Part Epoxies (two-part solid count must be lower than 40%)
• Urethane & Varnish Removal

Soy Gel is an industrial strength and consumer friendly paint, urethane, epoxy and acrylic stripper made with 100% American grown soybeans.

The low evaporation rate of Soy Gel and its gel formulation make it possible to remove several layers in one application. Soy Gel will not lighten any acid stained, color hardened and integrally colored concrete surfaces (will lighten or remove solvent dyes and water based stains). Soy Gel contains no methylene chloride, is not an alkaline-based stripper and cleans up easily with water. Unlike more traditional paint strippers, Soy Gel lets you work without the odor. Indoors or outdoors, you can be guaranteed a safe restoration process with Soy Gel.

Application:
Soy Gel is safe to use on concrete, brick, stone, metal, plaster, wood and many other surfaces. Do not use on plastic, PVC, rubber or dry wall. Soy Gel may be used indoors or outdoors. When used outdoors, protect plant and vegetation with a plastic drop cloth. Soy Gel may be used on vertical as well as horizontal projects.

Apply a thick, even layer of Soy Gel, generally between 1/16 and 1/8 inch to the coating to be removed by using a gauge rake, squeegee rake or airless sprayer (piston pumped with tip of 519 or similar). Don’t brush or scrape the surface until the stripper has had time to work. Check the progress of the stripping action by using a scraper to see if the coating is softened down to the surface. If not, wait longer and recheck. Soy Gel will remain wet and working for several hours. Longer is always better. Let the stripper do the work. If Soy Gel is left to sit outdoors, cover with a light plastic drop cloth to prolong the stripper’s wet time. Once the coating is softened, remove it with a scraper, industrial wet vacuum or other stripping tool. Reapply stripper if necessary. Repeat steps above. After use, clean remaining residue with water, using a scrub brush or mop.

*Ensure to scrape or vacuum excess removed coating and Soy Gel before applying any surface colorant or concrete sealer.

Allow surface to dry before further preparations.