FREE Shipping on Trial Kits

Specifications – AcquaSeal™ Satin

Application Tools Roller only: ⅜" nap roller, tray and extension pole. No pump or airless sprayer. A foam brush is for the 4 oz trial kit only.
Location Suitable for both interior and exterior surfaces.
Dry Time Dry to touch in 15 to 30 minutes. Light foot traffic in 1 to 2 hours (thumb test). Normal use in 24 hours. Vehicle traffic in 72 hours. Dry times vary with environmental conditions.
Re-Coat Time 1 to 2 hours, then the thumb test: press with your thumb (not your thumbnail); if it leaves a fingerprint, it isn't ready. Dry times vary with environmental conditions.
Cleanup Use ProClean Degreaser™ and warm water.
Coverage Approximately 200 sq. ft. per gallon for two thin coats, variable with surface conditions.
Recommended Topcoats Compatible with ProWax Polish™ (Interior Use).
Application Temperature Surface temperature between 50°F–95°F (10°C–35°C).
Recommended Uses Ideal for concrete floors, walls, countertops, and various architectural elements.
Important Note Prevent freezing to maintain product effectiveness.

Before You Checkout

EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.

Before You Checkout

AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.