Concrete color that reacts with the slab
Create variegated, one-of-a-kind concrete color with reactive acid stain systems for floors, patios, garages, and more.
Test first. Concrete composition and condition influence the final color.
Real concrete. One-of-a-kind color.
Shop the collection
7 products
Sale
Test three colors before committing to the full acid stain project.
Sale
Prep, stain, neutralize, seal, and apply with every core tool included.
Est. $0.66/sq ft 200 sq ft · full tool retail value excluded
View options View
Sale
Bulk stain and matched protection for large professional concrete projects.
Sale
Matched stain, neutralizer, and sealer for projects with tools on hand.
Sale
Permanent, variegated acid color for bare horizontal concrete. Neutralizer and sealer are not included.
Sale
Test three gel colors before staining walls and vertical concrete.
Sale
Clinging gel acid stain for walls, columns, risers, and details. Neutralizer and sealer are not included.
Plan with confidence
Get the prep, color, neutralizing, and sealer guidance that helps every coat work together.
Surface preparation
Test porosity, remove coatings and contaminants, and confirm the slab is ready before applying color.
Read the prep guideColor planning
Compare warm, neutral, and blue-green colors and combinations that create natural variation.
View the color chartFirst project
Follow the process from testing and preparation through staining, neutralizing, and sealing.
Learn the processFinish protection
Match the sealer to the slab location, moisture, traffic, and the finish you want.
Compare sealersWatch the process
The same step-by-step videos featured with the EverStain™ Complete Kit, gathered here for easier project planning.
Finish inspiration
Acid stain FAQ
The color is still present. It becomes richer after a compatible sealer is applied; solvent-based sealers generally deepen color more strongly, while water-based sealers create a softer look.
Remove curing compounds, existing sealer, paint, dirt, grease, and grime. Then water-test the slab to confirm the bare concrete is porous enough to absorb the stain.
Plan on up to about 200 square feet per gallon. Porous, textured, or weathered concrete and heavier application can reduce coverage, so round up when the job is close.
Wait at least 28 days before acid staining new concrete. Applying sooner can produce weak or unpredictable color.
The slab may be damp, but remove every puddle before staining so standing water does not dilute the acid stain.
No. Acid stain must contact bare, porous concrete to react. Existing sealer or paint has to be removed first.
EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.
AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.
