AcquaTintTrial System(3 colors, each up to 6 sq ft)
Test three water-based, low-odor colors on your concrete. Includes three 4 oz colors and separate foam brushes.
AcquaTint™ Black + Gray
Tinted Sealers color and seal concrete in one step: water-based AcquaTint™ for interiors, solvent-based EasyTint™ for exteriors.
6 products
The two systems with ProWax Polish™ are for interior floors.
Test three water-based, low-odor colors on your concrete. Includes three 4 oz colors and separate foam brushes.
One gallon each of AcquaTint™ and ProWax Polish™ to color, seal, and protect interior floors. Cleaner and tools are sold separately.
Five gallons each of AcquaTint™ and ProWax Polish™ for large interior floors plus future maintenance. Cleaner and tools are sold separately.
Water-based, low-odor color and seal for interior or exterior concrete. Add ProWax Polish™ on interior floors for wear protection.
Built for driveways, patios and high-traffic exterior concrete.
Test three solvent-based tinted sealer colors on your exterior concrete. Includes three 4 oz colors and foam brushes.
Solvent-based color and seal for exterior driveways, patios, and high-traffic concrete. Choose a compatible clear topcoat when needed.
Compare water- and solvent-based options, then match the system to location, traffic, and project size.
Compare location, moisture, traffic, ventilation, sheen, and maintenance before choosing a colored sealer.
Compare concrete sealersLearn how to prepare, keep pigment mixed, back-roll consistently, protect the finish, and avoid lap marks.
Read the AcquaTint™ guideCompare finished driveways, patios, pool decks, and stamped concrete before testing colors on your own surface.
View the color gallerySee when a semi-transparent tinted sealer can shift existing color and how to test the surface before recoating.
Read the restoration guideMeet EasyTint™, and water-test the slab before you coat it.
6:41
Customer projects, with the colors they used.
Coverage, coats and temperatures on this page come from the EasyTint™ data sheet and the AcquaTint™ data sheet. Every slab takes color differently, so test a small area first.
AcquaTint™ is water-based and low odor, making it the primary choice for interior floors and occupied spaces. EasyTint™ is solvent-based and designed for durable exterior applications. Both add semi-transparent color and seal concrete in one system.
Yes. Concrete age, porosity, texture, existing color, and previous coatings change the final appearance. Each trial system lets you compare three colors on the actual prepared surface before buying project quantities.
EasyTint™ and AcquaTint™ are listed at approximately 200 square feet per gallon for two thin coats. Actual coverage varies with concrete porosity, texture, surface condition, and application method.
AcquaTint™ needs clean, bare concrete, so strip any sealer, paint or coating first with Destiny™ Stripper. EasyTint™ can go over unsealed concrete or a sound solvent-based acrylic sealer, never over water-based sealers, latex or paint. Always test adhesion in a small area.
A clear topcoat is not required for every low-traffic project. It is recommended for many high-traffic exterior surfaces and required when slip resistance is needed. Use water-based topcoats over AcquaTint™ and solvent-based topcoats over EasyTint™.
No. Apply the colored sealer first, then add OxiGrip™ only to a compatible clear topcoat: AcquaSeal™ or HydroCryl™ over AcquaTint™, or a clear solvent-based sealer over EasyTint™.
The figures to plan a job with, from the AcquaTint™ and EasyTint™ data sheets. Every slab takes color differently, so test a small area first.
| Spec | AcquaTint™ Colored Sealer | EasyTint™ Tinted Sealer |
|---|---|---|
| Base | Water-based, low-VOC | Solvent-based |
| Best for | Floors indoors and out | Driveways, patios, high-traffic exterior concrete |
| Colors | 20 | 24 |
| Sizes | 4 oz, 1 gal, 5 gal | 4 oz, 1 gal, 5 gal |
| Coverage | About 200 sq ft per gallon, two thin coats | About 200 sq ft per gallon, two thin coats |
| Between coats | At least 2 hours | 6 to 12 hours |
| Foot traffic | 6 to 12 hours | 16 to 24 hours |
| Temperature | 60 to 95°F | 40 to 95°F |
EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.
AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.
Your cart contains AcquaTint™ or EasyTint™ and a sprayer that isn’t suitable for applying it. If you plan to spray your tinted sealer, use a sprayer with a fan tip.
Please remove this sprayer unless you need it for another compatible product.