FREE Shipping on Trial Kits | 15% OFF Sitewide | USE CODE: DAD

Specifications – Antiquing™ Stain

Application Tools Best applied using a pump sprayer (filter removed).
Location Suitable for exterior applications.
Dry Time Antiquing™ Stain requires 8 hours of drying before sealer application. It is recommended to apply two coats for optimal results. For detailed information on sealers, refer to HydroCryl™ TDS and EasySeal™ TDS. Dry times can vary with environmental conditions.
Re-Coat Time Additional coats can be applied without waiting.
Cleanup Use ProClean Degreaser™
Coverage Approximately 200 sq. ft. per gallon for two thin coats. It is recommended to apply two coats for optimal performance; coverage may vary depending on surface conditions.
Recommended Sealers Compatible with HydroCryl™ Water-based Performance Sealer or EasySeal™ Solvent-based Acrylic Sealer.
Application Temperature Best between 40°F–95°F (4°C–35°C).
Recommended Uses Ideal for stamped concrete driveways, patios, pool decks, walkways, and other outdoor concrete areas.
Important Note Requires proper ventilation due to strong fumes.

Before You Checkout

EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.

Before You Checkout

AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.