Specifications – HydroCryl™ Gloss
| Application Tools | ⅜" nap roller, tray and extension pole. No pump sprayer or airless sprayer. Exception: the 4 oz trial kit, which uses a foam brush. |
|---|---|
| Location | Suitable for both interior and exterior surfaces. |
| Dry Time | Dry to touch in 15 to 30 minutes. Light foot traffic in 1 to 2 hours (thumb test). Normal use, pets, furniture, rugs and mats in 24 hours. Vehicle traffic in 72 hours. Full cure in 7 days. Keep the surface dry for the first 24 hours. Dry times vary with environmental conditions. |
| Re-Coat Time | 1 - 2 hours, then the thumb test: press with your thumb (not your thumbnail); if it leaves a fingerprint, it isn't ready. Dry times vary with environmental conditions. |
| Cleanup | Use ProClean Degreaser™ and warm water. |
| Coverage | Approximately 200 sq. ft. per gallon for two thin coats, variable with surface conditions. |
| Recommended Topcoats | Compatible with ProWax Polish™ (Interior Use). |
| Application Temperature | Surface temperature 50°F–95°F (10°C–35°C). |
| Best For | Interior concrete flooring contractors, decorative concrete professionals, custom home builders, restaurant and retail designers, commercial flooring contractors with low-VOC compliance requirements, pool builders, and DIYers sealing stained, stamped, or plain concrete on interior floors, exterior patios, walkways, pool decks, and garage floors. |
| Important Note | Never let it freeze. A jug that has frozen is ruined: replace it. Once applied and cured, it stands up to winter freeze–thaw. |
