FREE Shipping on Trial Kits | 15% OFF Sitewide | USE CODE: DAD

Specifications – ProSeal Li™ Matte

Application Tools Best applied using a low-pressure pump sprayer. Back-roll to distribute evenly and pull material out of low areas.
Location Suitable for both interior and exterior surfaces.
Dry Time Allow full dry time before opening the surface to traffic. Dry times vary with environmental conditions.
Cleanup Use ProClean Degreaser™ and warm water.
Coverage Approximately 200 sq. ft. per gallon, variable with surface roughness and porosity.
Appearance Translucent — dries clear with a completely matte (no-shine) finish.
Application Temperature Air and surface temperatures must be above 45°F, with the surface at least 5°F above the dew point. Condition product to 70–95°F for best flow.
Recommended Uses Ideal for sidewalks, driveways, parking decks, floors, walls, brick, pavers, stucco, concrete, and porous stone.
Important Note Allow concrete to cure 21–28 days before sealing.

Before You Checkout

EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.

Before You Checkout

AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.