Specifications – AcquaTint™ + ProWax Polish™
Interior Seal & Polish System Specifications
| Specification | AcquaTint™ Colored Sealer | ProWax Polish™ |
|---|---|---|
| Purpose | Colors and seals the concrete in one step. | Sacrificial wear layer applied over the cured sealer. |
| Location | Interior and exterior. | Interior only. |
| Recommended Uses | Concrete floors, walls, countertops, and architectural elements. | Sealed interior concrete floors. Not for bare or unsealed concrete. |
| Finish | Satin. | Satin or Gloss — select at checkout. Non-yellowing, machine-burnishable. |
| Application Tools | Pump sprayer or ⅜" nap roller. Backrolling immediately after spraying is highly recommended — spraying without backrolling increases the risk of puddles, drips, and uneven color. | Trim pad, foam mop with wringer attachment, or microfiber push mop. Dampen the applicator in warm water and wring out all excess before use. |
| Number of Coats | 2 thin coats required for full color. |
3 thin coats for this system. General guidance by traffic level:
|
| Coverage | Approximately 200 sq. ft. per gallon at the required two coats. | Approximately 1,000 sq. ft. per gallon, per coat — about 500 sq. ft. at 2 coats, 330 sq. ft. at 3 coats, or 250 sq. ft. at 4 coats. |
| Application Temperature | 60°F–95°F (15°C–35°C), surface and air. | 60°F–95°F (15°C–35°C), surface and air. |
| Re-Coat Time | Dry to touch in 30–60 minutes. Wait at least 2 hours before the second coat and confirm with a thumbnail test — press firmly; no dent means ready. | 30–45 minutes minimum between coats. Allow longer in cool or humid conditions. |
| Foot Traffic | 6–12 hours after the final coat. | 6–12 hours after the final coat. |
| Full Cure | 24 hours. Allow full cure before applying ProWax Polish™. | 24 hours before replacing furniture, rugs, or other heavy objects. |
| Cleanup | Soap and warm water while wet. | ProClean Daily™ and warm water while wet. |
| Maintenance | Clean with ProClean Daily™ Neutral Cleaner or another compatible neutral-pH cleaner. | Clean with ProClean Daily™ Neutral Cleaner. Dry buff or burnish to restore sheen. Reapply a fresh coat as the wax layer wears. |
| Storage | Keep container tightly closed. Protect from freezing. | Keep container tightly closed. Protect from freezing. |
AcquaTint™ is semi-transparent and will not hide cracks, stains, or blemishes. Test a small, inconspicuous area first to confirm compatibility and appearance. For exterior projects, use AcquaTint™ on its own or with a clear AcquaSeal™ or HydroCryl™ topcoat — ProWax Polish™ is for interior use only.
