Specifications – ProWax Polish™ Gloss & Satin

ProWax Polish™ Specifications

Recommended Uses	Sealed interior concrete floors. Not for use on bare or unsealed concrete.
Location	Interior surfaces only.
Finish	Satin gloss, non-yellowing, machine-burnishable.
Application Tools	Trim pad, foam mop with wringer attachment, or microfiber push mop. A spray bottle may be used for controlled application in tight areas.
Coverage	Approximately 1,000 sq. ft. per gallon, per coat. Since most floors need more than one coat, one gallon covers: 2 coats — 500 sq. ft. 3 coats — 330 sq. ft. 4 coats — 250 sq. ft. 6 coats — 165 sq. ft. To estimate what you need: floor area × number of coats ÷ 1,000 = gallons. Coverage varies with surface porosity and texture.
Number of Coats	Low traffic: 2 thin coats Standard traffic: 2-3 thin coats High-traffic areas / pets: 3-4 coats Burnishing - 4-5 coats required Do not apply more than 4 coats in a 24-hour period.
Application Temperature	Best between 60°F–95°F (15°C–35°C), surface and air.
Re-Coat Time	30–45 minutes minimum. Allow longer in cool or humid conditions.
Dry Time — Foot Traffic	6–12 hours after the final coat, varying with environmental conditions.
Dry Time — Furniture	24 hours before replacing furniture, rugs, or other heavy objects.
Cleanup	Clean tools while wet using ProClean Daily™ and warm water.
Maintenance	Clean with a neutral pH cleaner such as ProClean Daily™ Neutral Cleaner. Dry buff or burnish to restore sheen.
Storage	Keep container tightly closed. Protect from freezing.

Test a small, inconspicuous area first to confirm compatibility and appearance.