EverStain™ 3-Step Complete Kit - 200 sq ft
Reactive acid stain for a natural, variegated finish.
Sure about the project but not the color? Try our trial kit first.
Your cart is still here
Your items are saved exactly as you left them. The extra 10% is already on the order — nothing to re-add, nothing to type.
Your cart
Nothing to re-add. Your discount is applied at checkout.
Limited time · where your extra 10% actually pays
Stain, neutralizer, sealer and applicators — matched to each other so nothing fights. From a 200 sq ft weekend to a 1,000 sq ft job. Prices below already include your extra 10%.
Reactive acid stain for a natural, variegated finish.
Water-based color when you need a predictable result.
Built for stamped patios, driveways and pool decks.
Solvent-based color for concrete pavers and hardscape.
Fast-drying, saturated dye for interior floors.
The three-step acid stain bundle without the extras.
Water-based paver system for low-VOC jobs.
Contractor scale: covers up to 1,000 sq ft in one order.
Orders over $499 ship free.
25 years of finished floors
My floors are stunningly beautiful! The application process was surprisingly easy. I get rave reviews from all of my guests.
DannaVerified buyer · EverStain™
Follow the instructions and you can't go wrong. I love the unexpected color results!
DerrickVerified buyer · EverStain™
Application is easy with a pump sprayer. Layering darker colors two or three times over a lighter base produces great depth of color.
JoelVerified buyer · EverStain™
Your extra 10% is still on the order · held for — · code FINISH10
Sure about the project — not the color?
Acid stain reacts with the minerals in your concrete, so no two floors come out the same. That's the honest reason a photo can't tell you how yours will look — and the reason this kit exists.
3 × 4 oz stain colors — about 6 sq ft each
4 oz ProClean™ neutralizer + 4 oz sealer
6 foam applicators — nothing else to buy
Your extra 10% applies here too — limited time
$35.95$39.95EXTRA 10% + SHIPS FREE
Trial systems are non-returnable. See the color charts first →
Not sure how much — or which products?
One gallon of stain covers about 200 sq ft. So does one gallon of sealer. Type your square footage — buying short is the most expensive mistake in this project.
Stain —
Sealer —
Or complete kits —
Rounded up. Porous or heavily textured concrete drinks more — round up again if in doubt.
BEFORE YOU BUY
Straight answers before you commit to a color.
Not exactly, and that is the point. Acid stain reacts with the minerals in your slab, so every floor comes out slightly different. Water-based ColorWave® is the more predictable option if you need to match a plan. Either way, the trial system is how you find out on your own surface before committing to a gallon.
Prep and clean, stain and neutralize, seal. Three steps, no specialty tools beyond a pump sprayer. Every kit ships with instructions, and there are step-by-step videos and written guides for each product line.
Yes. The stain is the color; the sealer is what protects it and sets the sheen. That is why the kits include both: buying them separately usually costs more and risks mismatching the chemistry.
The paver and stamped-concrete lines, Antiquing™, Portico™ and PaveWave™, are built for exterior work: driveways, patios, pool decks and walkways. Check the technical data sheet for the specific product before ordering.
Yes. DC PRO™ gets you discounted pricing, account support, expedited processing and priority referrals. Contractor systems cover 1,000 sq ft in one order.
Still stuck on something? Talk to a specialist before you order — not after.
Don't miss the opportunity — there's an extra 10% on your order right now, and code FINISH10 applies the moment you click . Nothing to re-add.
EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.
AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.