EasyTint™ Tinted Concrete Sealer
EasyTint™ Tinted Concrete Sealer
Color and seal your concrete in one step — solvent-based durability — Professional-grade solvent-based sealer with pigment built in. Satin finish engineered for exterior high-traffic applications.
How much do I need to stain my concrete?
- It will depend on the square footage of your application.
- The coverage rate is 200 square feet per gallon (2 coats) depending on concrete porosity. Two or more coats are required.
Concrete Stain Calculator
Amounts of coats:
Amount of EasyTint™ to use:
Your Recipe:
| Size | Qty |
|---|
Product Details
Product Details
Color and Seal Your Concrete in One Step — Maximum Durability
EasyTint™ is a professional-grade, solvent-based tinted concrete sealer that adds permanent color to concrete and seals the surface at the same time. One product. One application. Your concrete is colored and protected in a single step — with the traditional solvent-based acrylic durability that contractors have relied on for decades for the toughest exterior applications.
EasyTint™ is the choice for concrete driveways, commercial walkways, high-traffic patios, stamped concrete, and any exterior surface where the finish needs to hold up to years of weather, UV exposure, vehicle traffic, freeze/thaw cycles, and daily wear. The solvent-based chemistry delivers a harder, more durable cured film than water-based alternatives, which translates into longer-lasting color and better long-term performance under hard conditions.
EasyTint™ cures to a satin finish that preserves the natural look and texture of concrete while adding the rich, durable color your project needs. For contractors, the color-and-seal-in-one format cuts project time roughly in half — one product, one visit, one application instead of the traditional multi-step process.
What EasyTint™ Does and How It Works
EasyTint™ is a solvent-based acrylic sealer with pigment dispersed throughout the product. When you apply it to clean, prepped concrete, the sealer forms a durable protective film on the surface while the pigment delivers rich, even color. As the solvent evaporates, the acrylic cures into a permanent finish that protects the concrete from water penetration, UV exposure, stains, and surface wear — and the pigment is locked into that seal, delivering consistent color across the entire surface.
The solvent-based chemistry gives EasyTint™ deeper pigment penetration into the concrete pore structure and a harder, more durable cured film than water-based colored sealers. For high-traffic exterior applications — driveways that handle daily vehicle traffic, commercial walkways that see thousands of footsteps per week, patios in harsh climates — this durability advantage is the reason to choose EasyTint™.
The recommended application is two coats, which delivers full color saturation and maximum surface protection. EasyTint™ covers approximately 200 square feet per gallon with the recommended two-coat application.
What EasyTint™ Tinted Concrete Sealer Is Used For
Residential concrete driveways — The classic use case for EasyTint™. Colors and seals a driveway in one step with the solvent-based durability that handles years of vehicle traffic, weather, and UV exposure. For heavily-used driveways, apply a clear solvent-based sealer topcoat for additional protection.
Stamped concrete — EasyTint™ colors and seals stamped concrete surfaces in one application, delivering rich color in the texture and recesses of the stamp pattern while protecting the entire surface. Popular on stamped patios, courtyards, walkways, and pool surrounds.
High-traffic commercial walkways and entryways — Retail storefronts, restaurant entrances, commercial building walkways, and hotel exteriors where durability and professional appearance both matter.
Concrete patios — Backyard patios, outdoor entertaining areas, and courtyards. EasyTint™ handles weather, UV, and foot traffic on exterior patios.
Concrete walkways — Front walks, garden paths, and commercial paths.
Concrete pool decks — Pool surrounds where you want color and protection. For pool decks, a clear topcoat with slip-resistant additive is required (see topcoat guidance below).
Exterior concrete stairs and ramps — Where slip resistance is needed, use EasyTint™ as the color layer and a clear solvent-based sealer with OxiGrip™ as the topcoat.
Cold climate and freeze/thaw zone applications — The solvent-based chemistry handles freeze/thaw cycles better than water-based alternatives. For exterior concrete in northern climates, this matters.
Faded or weathered concrete restoration — Old exterior concrete brought back to life with color and a fresh seal in one step.
See EasyTint™ on real customer projects — Browse the Direct Colors customer photo gallery to see EasyTint™ applied to driveways, patios, stamped concrete, and commercial surfaces across the country.
Specifications
Specifications
| Application Tools | Pump sprayer or ⅜” nap roller |
|---|---|
| Use Location | Interior / Exterior |
| Dry to Touch | 4–6 hours |
| Foot Traffic | 16–24 hours |
| Vehicle Traffic | 24–48 hours |
| Re-Coat Time | 6–12 hours |
| Coverage | 200 sq. ft. / gallon (2 coats) |
| Cleanup | Xylene |
| Topcoat | ProWax Polish™ |
| Application Temp. | 40°F – 95°F (4°C – 35°C) |
| Recommended Uses | Concrete floors, walls, countertops |
| Ventilation |
Requires proper ventilation |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Product Videos
EasyTint™ Satin
Explore the complete EasyTint™ Satin palette and discover the perfect shade for your concrete project.
- Semi-transparent colors that enrich natural concrete texture
- Low-sheen satin finish ideal for patios, walkways, and pool surrounds
- Adds understated color while protecting outdoor concrete surfaces
- Designed for entryways, textured, stamped, and decorative concrete
⚠️ Important: When You Need a Clear Topcoat Over EasyTint™
EasyTint™ is a complete color-and-seal product for most applications. For many residential patios, walkways, and low-traffic exterior surfaces, two coats of EasyTint™ is the finished job. However, a clear topcoat is either recommended or required in certain situations:
| Application | Topcoat Needed? | What to Use |
|---|---|---|
| Interior floors (general) | Recommended | ProWax Polish™ — acts as a sacrificial layer that protects the color finish from daily foot traffic. Easy to reapply as it wears. |
| Exterior low-traffic (patios, walkways) | Not required | EasyTint™ alone is sufficient |
| Exterior high-traffic (driveways, commercial) | Recommended | A clear solvent-based concrete sealer for added durability |
| Slip resistance required (pool decks, stairs, ramps) | Required | Clear solvent-based concrete sealer + OxiGrip™ slip-resistant additive |