Specifications – Destiny™
| Application Tools | Roller, mop, or coarse nylon brush for horizontal and angled surfaces. Spray application is also acceptable. |
|---|---|
| Application Coat | Apply one thick, even coat — do not spread thin. The product must remain shiny and wet to actively work. |
| Application Temperature | Do not apply below 45°F (7°C). Use only with proper ventilation. |
| Yield |
Interior surfaces: 150–225 sq ft per gallon. Exterior surfaces: 125–200 sq ft per gallon. Depeding on surface texture, porosity, coating type, and thickness. Heavy or multi-layer coatings reduce coverage. |
| Compatible Sealers (After Stripping) | Clear acrylic sealers: HydroCryl™ water-based acrylic sealer or EasySeal™ solvent-based acrylic sealer. |
| Dry Time / Recoat | A few minutes to several hours depending on coating type, thickness, and number of layers. Confirm readiness with a scratch test — if the coating releases easily, proceed with removal. Do not let the product dry on the surface, or the coating may reconstitute and bond back. |
| Recommended Uses | Concrete, masonry, pavers, brick, flagstone, slate, and aggregate surfaces. Removes failed sealers, paints, acrylic stains, varnishes, and multi-layer coatings. |
| Important Note | Softened coating is extremely slippery — use caution on treated areas. Always perform a small test area first to confirm effectiveness, dwell time, and coverage before starting the full project. |
