Specifications – OxiGrip™
| Application Tools | Apply with a 3/8" nap roller or an acrylic-sealer-rated sprayer with the strainer/filter removed. Do not use garden sprayers, as the grit may clog the sprayer. |
|---|---|
| Application Coat | Use only in the final/top coat of clear sealer. |
| Mix Ratio |
3 oz Jar: Add the entire jar to 1 gallon of clear sealer. 16 oz Jar: Add the entire jar to 5 gallons of clear sealer. |
| Coverage |
3 oz Jar: Approximately 200 sq. ft. 16 oz Jar: Approximately 1,000 sq. ft. |
| Mixing Instructions | Pre-mix OxiGrip™ in a separate pail with sealer, then add it to the main batch and blend well. Stir often during use to prevent settling. |
| Compatible Sealers | Clear acrylic sealers: HydroCryl™ water-based acrylic sealer or EasySeal™ solvent-based acrylic sealer. |
| Dry Time / Recoat | Follow the sealer label or Technical Data Sheet for dry times and recoat times. |
| Recommended Uses | Pool decks, stairs, ramps, walkways, garages, commercial entrances, and other sealed concrete surfaces where extra traction is needed. |
| Important Note | For clear sealers only. Do not mix OxiGrip™ directly into tinted or colored sealers. If your project needs both color and slip resistance, apply the colored sealer first, then apply a compatible clear topcoat with OxiGrip™. |
