Exterior
Exterior
EasySeal™ Solvent Based Acrylic Concrete Sealer
Regular price
$64.95
Sale price
$64.95
Regular price
Choose your option
Interior
Interior
Exterior
Exterior
HydroCryl™ Water Based Performance Sealer
Regular price
$74.95
Sale price
$74.95
Regular price
Choose your option
Interior
Interior
Exterior
Exterior
AcquaSeal™ Water Based Acrylic Concrete Sealer
Regular price
$64.95
Sale price
$64.95
Regular price
Choose your option
Exterior
Exterior
EasyCureSeal™ Acrylic Concrete Cure & Seal
Regular price
$149.95
Sale price
$149.95
Regular price
Choose your option
Exterior
Exterior
EasyRepair™ Sealer Repair Solution
Regular price
$43.95
Sale price
$43.95
Regular price
Choose your option
Concrete Sealer Buying Guide
Concrete is tough, but stains, sunlight, and daily traffic can still wear it down. The right sealer locks in color, sheds water, and makes cleanup a snap—indoors or out. Scroll through our lineup below to find your best match, then finish strong with ProWax Polish™ for easy interior upkeep or OxyGrip™ when you need extra grip outside.
|
|
|
|
|
|
|
Base
|
Solvent (strong fumes) |
Water‑Based (low odor) |
Water-based (low odor) |
Solvent Cure & Seal (breathable) |
|
Finish
|
Satin / High‑Gloss |
Satin / High‑Gloss |
High‑Gloss |
Low‑Sheen / Satin |
|
Best for
|
Exterior |
Interior, Exterior |
Interior,Exterior |
New pours, freeze‑thaw climates |
|
Color Impact
|
Deepens color the most |
Moderate color pop |
Deeper color pop with high gloss |
Mild–Moderate pop |
|
Pro Tips
|
Add OxyGrip™ to the final clear coat for slip‑resistance. |
Add OxyGrip™ to the final clear coat for slip‑resistance. |
Add OxyGrip™ to the final clear coat for slip‑resistance. |
Add OxyGrip™ to the final clear coat for slip‑resistance. |
Pick Your Sealer in 3 Quick Questions
Where?
Indoors: Low‑odor AcquaSeal™ or HydroCryl™
Outdoors: EasySeal™ or HydroCryl™
How Busy?
Light / Medium: AcquaSeal™
Heavy: EasySeal™ (solvent) or HydroCryl™(water)
What Look?
Satin (soft sheen): EasySeal™/ AcquaSeal™
High‑Gloss (wet look): EasySeal™/ AcquaSeal™ / HydroCryl™
Expert Application Tips
No wax outdoors
UV and rain break wax down too quickly—stick to acrylic sealers for exterior surfaces.
Wax indoors
Once your stain + sealer have cured, apply ProWax Polish™ to interior floors. Re‑waxing is quicker than resealing, and you can spot‑wax entryways or other high‑traffic zones as needed.
Add OxyGrip™
Requires a concrete sealer plus clear wax for optimal protection.
Allow each coat to dry
to the touch before the next—typically 2–4 hours for water‑based, 4–6 hours for solvent‑based.
Apply thin, even coats
two light passes outperform one heavy flood coat.
Best Way to Apply
Coverage at a Glance
For a long‑lasting finish, apply two thin coats. One gallon will treat about 400 sq ft total (roughly 200 sq ft per coat) on smooth, troweled concrete. Very dense surfaces may stretch a bit farther, while rough or porous slabs can soak up more—have an extra quart on hand just in case.
Maintenance Made Easy
Clean sealed surfaces with a neutral‑pH cleaner and a soft mop or low‑pressure rinse. Skip harsh solvents or acidic cleaners that can dull or attack the acrylic film.
Calculator for EasySeal™, AcquaSeal™ and HydroCryl™ vs SQ FT
How much sealer to buy:
- Coverage depends on the square footage of your application.
- The coverage rate is 200 square feet per gallon (2 coats) depending on concrete porosity. At least 2 coats are required.
Dimensions of concrete to be sealed:
feet long by
feet wide
Amounts of coats:
Amount of sealer to use:
0.000
