Wear the wax, not the sealer.
ProWax Polish™ is a sacrificial finish for sealed interior concrete. It sits on top of your sealer and absorbs the daily abuse — foot traffic, grit, scuffs, furniture drag. When the shine dulls, buff it or add a coat. Your sealer never gets touched.
- High-gloss, non-yellowing finish: from synthetic polymers and precision leveling agents
- Scratch and scuff resistant,: burnishable for a harder finish in high-traffic areas
- Recoat in 30–45 minutes,: foot traffic in 6–12 hours
- Fast recoat: Recoat in as little as 30–45 minutes.
- Water-based and easy to clean up: with warm water
- Easy cleanup: Tools clean up with ProClean Daily™ and warm water.
ProWax Polish™ Concrete Floor Wax
ProWax Polish™ Concrete Floor Wax
ProWax Polish™ takes the daily scuffs and traffic so your stain and sealer don't. A non-yellowing wax in Satin or High-Gloss that mops on, dries clear, and refreshes anytime — no stripping, no resealing.
Need help? Talk to one of our Project Coaches.
Request a Callback
Leave your number and our team will call you back.
About: ProWax Polish™ Concrete Floor Wax
Thanks — we'll call you back!
Our team will reach out shortly during business hours.
How much do I need to wax my concrete floor?
How much do you need?
- It will depend on the square footage of your application and if this is the first applicaton or a subsequent one.
- One gallon covers approximately 500 sq. ft. at 2 coats, 330 sq. ft. at 3 coats, or 250 sq. ft. at 4 coats (1,000 sq. ft. per coat).
Concrete Floor Wax Calculator
Amount of coats:
Color & finish:
What you need to cover 0 sq ft:
| Product | Qty | Subtotal |
|---|---|---|
| Estimated total | — | |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
ProWax Polish™ is a water-based floor wax that adds shine and a sacrificial wear layer to sealed interior concrete. Its polymer formula takes the daily abuse — scuffs, grit, foot traffic — so your sealer and stain underneath stay protected. When the shine dulls, you clean the floor and mop on a fresh coat. No stripping, no downtime, no reapplying sealer.
Choose High Gloss for a deep, reflective wet look that makes stain and dye colors pop, or Satin for a soft, low-sheen finish that hides light scuffs and footprints.
Why customers choose it
- Protects the finish you paid for — the wax wears instead of your sealer, so color and topcoat stay intact underneath
- Refresh with a mop, not a strip — clean the floor and apply a new coat whenever the shine fades
- Built to take traffic — the polymer resists scratching, scuffing, and daily wear for a long service life
- Two finishes from one formula — the same durability whether you want a mirror shine or a quiet satin sheen
- Buff it brighter — build four or more coats and burnish the final one for a showroom-level gloss
- Water-based and clear-drying — low odor, non-yellowing, and safe to apply indoors
Where to use it
- Stained and dyed concrete floors — deepens color and brings out depth in acid-stained work
- Sealed residential floors — kitchens, living areas, basements, and entryways
- Commercial and retail interiors — showrooms, lobbies, offices, and restaurant dining rooms
- Touch-up and spot repair — keep an 8 oz. bottle on hand for scuffs and spills between full applications
ProWax Polish™ Specifications
| Recommended Uses | Sealed interior concrete floors. Not for use on bare or unsealed concrete. |
|---|---|
| Location | Interior surfaces only. |
| Finish | Satin gloss, non-yellowing, machine-burnishable. |
| Application Tools | Trim pad, foam mop with wringer attachment, or microfiber push mop. A spray bottle may be used for controlled application in tight areas. |
| Coverage |
Approximately 1,000 sq. ft. per gallon, per coat. Since most floors need more than one coat, one gallon covers:
|
| Number of Coats |
|
| Application Temperature | Best between 60°F–95°F (15°C–35°C), surface and air. |
| Re-Coat Time | 30–45 minutes minimum. Allow longer in cool or humid conditions. |
| Dry Time — Foot Traffic | 6–12 hours after the final coat, varying with environmental conditions. |
| Dry Time — Furniture | 24 hours before replacing furniture, rugs, or other heavy objects. |
| Cleanup | Clean tools while wet using ProClean Daily™ and warm water. |
| Maintenance | Clean with a neutral pH cleaner such as ProClean Daily™ Neutral Cleaner. Dry buff or burnish to restore sheen. |
| Storage | Keep container tightly closed. Protect from freezing. |
Test a small, inconspicuous area first to confirm compatibility and appearance.
Frequently Asked Questions
How often should I reapply ProWax Polish™?
How often should I reapply ProWax Polish™?
For residential use, reapply wax every 6-8 months depending on foot traffic. High-traffic areas like entryways and hallways may need more frequent spot treatments. For commercial applications, waxing may be needed more frequently. You can spot-wax high-traffic zones as needed between full applications.
Does wax replace the need for sealer?
Does wax replace the need for sealer?
No! Wax does not replace sealer. Sealer penetrates deep into the pores of your concrete, protecting the surface and maintaining your concrete's true color. Wax is a topical application designed to protect and enhance the finish of the sealer. Think of it as a protective layer on top of the sealer – the wax protects the sealer while the sealer protects the concrete.
Why are there white spots on my concrete after applying wax?
Why are there white spots on my concrete after applying wax?
Uneven Surface and Pooling: If the concrete surface is uneven with low spots, wax can pool in these areas when applied too heavily. This pooling can cause the wax to become milky or white, especially noticeable in rounded spots where the accumulation is significant. Moisture Trapped Under the Wax: Any remaining moisture on the surface or within the pores of the concrete that gets trapped under the wax layer can lead to a milky or hazy appearance. This moisture needs to evaporate completely; otherwise, as it tries to escape, it clouds the wax. Application on Cold Surfaces: Applying wax to a concrete surface that is below 60°F can prevent the wax from curing properly, leaving it white and milky—similar to its appearance when first applied. The wax doesn’t bond well with cold surfaces, resulting in an undesirable finish.
How can I prevent white spots from forming when waxing concrete?
How can I prevent white spots from forming when waxing concrete?
Ensure Even Application: Avoid applying wax too heavily, especially on uneven surfaces. Aim for a thin, even coat to prevent pooling. Dry the Surface Thoroughly: Make sure the concrete is completely dry, with no moisture on the surface or within its pores, before applying wax. Apply at the Right Temperature: Apply wax only when the concrete surface temperature is at or above 60°F. For optimal results, the wax should be within 5-7 degrees of the floor temperature during application.
What should I do if I already have white spots on my waxed concrete?
What should I do if I already have white spots on my waxed concrete?
Remove Excess Wax: In areas where wax has pooled, carefully remove the excess. This may involve reapplying a thinner layer of wax or using a wax stripper followed by a proper application. Address Moisture Issues: If moisture is the culprit, allow the area to dry thoroughly. This might mean using dehumidifiers or fans to speed up the drying process. Once dry, reapply the wax as recommended. Adjust Temperature: If possible, increase the temperature of the area to above 60°F and allow the surface to reach this temperature before reapplying wax.
Related Links
Product Videos
