Easily add or restore color to previously stained concrete driveway, pathway, patio, or any stamped concrete where color has faded.
Our premium, spray-on formula applies directly on top of concrete in combination with our top-of-the line sealers
provide you with a fade resistant, low maintenance, and easy to clean outdoor living space for many years to come.
5-6 hours before applying outdoor concrete sealer
: Approximately 200 sq. ft. per gallon depending on concrete porosity
Solvent-Based, Acrylic Concrete Sealer
Outdoor textured or stamped concrete (Patios, Driveways, Walkways)
APPLYING THE ANTIQUING STAIN
With any DIY project, safety should be your number one priority. When applying concrete antiquing stain or any concrete coloring product,
it’s important to take precautions to ensure your safety, and the safety of those around you.
Wear a Dust Mask, Safety Gloves to prevent fume inhalation and skin irritation from direct contact with the stain.
Spiked Shoes should be used in concrete staining projects to prevent footprints and slipping when applying the antiquing stain.
Concrete antiquing stains may take multiple layers to achieve the desired color.
The spiked Shoes will allow you to walk across and around your project area without affecting your previous layer.
Concrete Antiquing Stain is available in 29 unique colors. A gallon of concrete antiquing stain should be enough to complete a 200 square foot project.
This amount of stain accounts for multiple layers for you to achieve your desired color for your outdoor stamped concrete.
Shake the bottle of concrete antiquing stain to activate the colorant.
Open the lid and pour the antiquing stain into a Pump Up Sprayer.
Shake the pump sprayer filled with concrete antiquing stain to activate the colorant. Use the pump to increase the pressure, and start spraying.
NOTE: Spray the concrete antiquing stain in a corner of your project area to test.
Spray the concrete antiquing stain in even layers across the entire concrete surface until you achieve a “wet” consistency. Be sure to shake the pump sprayer periodically
to avoid clumping around the nozzle.
Allow the final coat of concrete antiquing stain to dry for up to 6 hours before sealing.
SEALING THE STAMPED CONCRETE
You must apply sealer after using Antiquing stain. If you skip this step, the final color will not show and the stain can be washed off.
Our Solvent-Based, Satin Acrylic Sealer is the perfect product to finish your concrete antiquing stain project.
This sealer is perfect for outdoor concrete, is easy to apply, and highlights the underlying colors of your newly stained concrete pavers.
To apply the Direct Colors’ Solvent-Based Satin Acrylic Sealer
, first pour the product into a Sealer Pump Sprayer.
Put on your Dust Mask, Safety Gloves and Spiked Shoes
. Evenly apply two coats of sealer to your stamped concrete surface.
Allow each coat of concrete sealer at least 6 hours to dry before applying second or third layers.
Once the final coat of sealer has dried, you’re all done! Enjoy your newly concrete antiquing stained stamped concrete!
What is Stamped Concrete?
Stamped concrete also known as patterned concrete or imprinted concrete, uses silicone stamps designed to mimic real stone, slate, bricks, cobblestone, and even wood planks.
Stamped concrete patterns can be applied using a concrete overlay that goes over pre-existing concrete, or it can be imprinted into freshly-poured concrete before it hardens.
Click/Tap each question to hide/show the answers.
When I applied my antiquing stain, why am I not seeing a difference in color?
The pigments in antiquing stain nest down into the concrete pores so it appears as if there is very little or no color change Once you apply our acrylic solvent-based sealer, you will see a dramatic difference in color.
I ordered a trial kit and we found the color we are going with. Can I stain yet this Fall and seal in the spring? No way will we meet the temp spec for sealing this year.
For Antiquing stain there is no way to apply it without then
sealing it because its just pigments in a dispersion solvent and once its dry the
pigments will be taken away by wind, rain, traffic. It would be best to just wait for the whole project to come together.
Is antiquing concrete stain permanent?
No, Antiquing Concrete Stain is a topical colorant. As the product is applied, the pigments will nest into the concrete pores, the solvent-based liquid will off-gas and dry, and then a sealer will need to be applied to keep the colorant on the surface.
How long does the antiquing stain need to dry before applying sealer?
For exterior concrete, allow 6-8 hours for antiquing stain to dry and off-gas before applying acrylic solvent-based sealer.
What should I use for cleanup of antiquing stain?
Odorless mineral spirits should be used for the cleanup of antiquing stain.
I am using the antiquing concrete stain in my garage. prepped/ sprayed the stain but it has left a heavy dust on the surface after over 12 hours. Is this normal?
The Antiquing Stain by itself is only a pigment based topical colorant and needs a sealer otherwise the color will just wash/erode away.