ProClean Degreaser™

ProClean Degreaser™ is a concentrated concrete cleaner and degreaser designed to remove oils, dirt, grime, debris, and other surface contaminants from concrete before staining or sealing. Proper surface cleaning is the most critical step in any decorative concrete project – if your concrete isn't clean, stains and sealers won't adhere or perform correctly.

Dilute ProClean Degreaser™ with warm water according to the recommended ratio for your cleaning needs. Apply the solution to the concrete surface and scrub thoroughly with a stiff nylon bristle brush or floor scrubber. For heavy grease or oil stains, use a more concentrated mix. Rinse the surface thoroughly with clean water after scrubbing and allow it to dry completely before applying stain or sealer.

ProClean Degreaser™ is a concentrated cleaner primarily intended for surface preparation before staining and sealing. For regular maintenance of sealed concrete floors, we recommend using a neutral-pH cleaner with a soft mop. Harsh or acidic cleaners can dull or damage the acrylic sealer finish over time.

Yes, ProClean Degreaser™ can be used safely indoors. Ensure adequate ventilation during use and follow all safety precautions on the product label. Wear gloves and eye protection when handling the concentrated product.

No, ProClean Degreaser™ is designed to remove oils, dirt, and grime – not paint or sealers. To remove existing paint, use Soy Gel Stripper. To remove carpet glue or mastic adhesive, use Bean-E-Doo® Mastic Remover. For removing existing acrylic sealers, a chemical stripper or solvent like xylene may be required.