Destiny™ Stripper is a professional-grade, non-toxic concrete sealer stripper engineered to remove acrylic, urethane, and epoxy sealers, paints, varnishes, and acrylic stains from concrete, pavers, brick, wood, and most masonry substrates — without caustics, harsh solvents, or skin-burning chemistry.

Built on a proven coating-removal formula trusted by professional applicators nationwide, Destiny Stripper uses a low-odor, biodegradable chemistry safe for interior and exterior projects. It liquefies the coating so it can be scraped, pressure-washed, or wet-vacuumed away — leaving a clean, paint- and sealer-free surface ready for refinishing.

WHAT IT REMOVES
- Acrylic concrete sealers (solvent- and water-based)
- Urethane and polyurethane sealers
- Epoxy floor coatings
- Paver sealers — wet-look, matte, and gloss
- Latex and oil-based paints
- Concrete stains and decorative acrylic finishes

WHERE TO USE IT
- Stamped, stained, and decorative concrete
- Garage floors, basements, and patios
- Paver driveways, walkways, and pool decks
- Brick and stone masonry
- Interior floors (above 45°F) and exterior surfaces

WHY PROS CHOOSE DESTINY STRIPPER
✓ Non-toxic — no methylene chloride, no caustic soda, no MEK
✓ Low odor — safer for interior and occupied-space jobs
✓ Multi-layer removal — strips through stacked sealer coats in one pass
✓ Does not burn skin or off-gas harmful fumes
✓ Biodegradable and easy to clean up with water
✓ Coverage up to 250 sq ft per gallon (interior)
✓ Made in the USA

HOW TO APPLY
1. PREP — Mask adjacent areas with polyethylene sheeting and tape.
Surface temperature must be above 45°F (7°C).
2. APPLY — Saturate the surface using a roller, mop, or sprayer.
Agitate with a coarse nylon brush. Cover with poly sheeting in hot or windy conditions. DO NOT LET PRODUCT DRY — coating may reconstitute.
3. DWELL — Allow the stripper to penetrate. Dwell time ranges from minutes to several hours depending on coating thickness. As long as the surface is shiny and wet, it is still working.
4. REMOVE — Scrape, pressure-wash (hot water + rotary turbo nozzle
accelerates removal), or buff with a low-speed buffer and strip pads. Recover slurry with a wet-vac.
5. CLEAN — Rinse and neutralize before applying any new sealer or coating.

COVERAGE & SPECIFICATIONS
- Interior coverage: 175–250 sq ft per gallon (16.3–23.2 m²)
- Exterior coverage: 150–225 sq ft per gallon (13.9–20.9 m²)
- Application temperature: above 45°F (7°C)
- Storage: 40–90°F, protect from freezing
- Made in the USA