Aztec Brown is the warm, earthy brown that does the most work in our catalog. It reads as natural stone on stamped concrete, it blends old and new slabs into one surface, and it takes a border color beautifully. It is the same color across five product lines — 402 Antiquing™, 702 Portico™, 502 EasyTint™, 502 AcquaTint™, and 301 Vibrance™ Dye — so you can pick the product to suit the surface and keep the color.
A stamped patio in Aztec Brown with Black, Charcoal, and Yukon Gold accents.
choose Antiquing™ for stamped or broomed slabs, Portico™ for pavers, EasyTint™ or AcquaTint™ when you want color and sealer in one, and Vibrance™ Dye for interior floors.
Note on results: every photo here is a real Direct Colors customer project. Our stains are semi-transparent, so your concrete's original tone and condition shape the final color — always test a small area before you commit to the whole surface.
Stamped fire-pit patio with a Russet border
A five- or six-year-old stamped patio that had gone too long without a reseal. Cleaned Friday, two coats of stain Saturday, two coats of sealer Sunday — one weekend, start to finish.
Colors
Aztec Brown Antiquing™ + a Russet Antiquing™ perimeter
Prep
Thorough clean, no acid
Coats
Two stain, two EasySeal™ Satin
Size
450 sq. ft.
Time
2 days
Faded stamped concrete patio with fire pit before restaining, showing dull color and surface wear.Stamped patio restored with Aztec Brown stain and Russet border, featuring even color and soft satin sheen.Stamped concrete patio with fire pit area finished in Aztec Brown and Russet border, showing rich color and glossy sealed surface.
“We have a stamped concrete patio out back, with a fire pit. It's been about 5-6 years since I've resealed it, and it was looking neglected… I thoroughly cleaned the concrete on a Friday. Stained it on Saturday, 2 coats. Then I sealed it on Sunday, again 2 coats.” Tips: “Keep the pump sprayer pressure as high as you can — the stain and sealant comes out better. Don't be afraid to deviate some from the circular pattern of spray, as suggested. Properly quarantine the area from pets.” — DIY Customer
Blending 10-year-old concrete into new
A large backyard patio that had been poured in two eras. Cafe Royale carried the main surface and Aztec Brown picked out the darker accent lines, which pulled the old and new sections into one continuous color.
Colors
Cafe Royale Antiquing™ field + Aztec Brown accent lines
Coats
Two, with a third on the older concrete
Size
1,500 sq. ft.
Time
4 days
Before — new concrete beside a 10-year-old slab.After — one continuous surface.
Tips from the customer: “Apply at least two coats for even coverage — more may be needed on older surfaces. Order extra stain to ensure consistent color across old and new concrete. Don't worry if the stain looks lighter before sealing — the color deepens beautifully once sealed.” — DIY Customer
A multi-color paver patio, one paver at a time
A $9,000 paver patio that the builder had sealed with the wrong product a year earlier. The owner stained each paver individually across four colors, filled the joints, and put two coats of sealer over the lot.
Colors
Aztec Brown, Yukon Gold, Charcoal, and Black Antiquing™
Prep
ProClean Degreaser™, cracks filled
Coats
Two sealer
Size
500 sq. ft.
Time
8 days
Beautiful landscaped backyard walkway and patio featuring bold paver colors and fresh sealing with Aztec Brown and accents.Side-by-side before and after photos of a paver patio showing dramatic color improvement using Direct Colors products.
“Be sure to fill any cracks between the pavers before sealing. I wanted multi-colors, so I colored each one a different color… The patio builder built it last year and sealed it incorrectly with garbage sealer. We spent over $9,000 on the patio, and it looked awful… We have neighbors coming by to see the patio! Everyone is blown away by the difference. We can't believe how the water beads on the patio now after applying your sealer — we never had that with the inferior sealer.” — DIY Customer
A 21-year-old stamped porch, painted like a landscape
This half-circle porch had lost all its color, and an earlier reseal with an incompatible product had left it sticky to the touch a month later. The owner worked it in layers: Chocolate as a base, Buff dry-brushed onto the high points to make them project, then Cinnabar and Aztec Brown down in the low areas for depth.
Colors
Chocolate base, Buff highlights, Cinnabar + Aztec Brown lows — all Antiquing™
Prep
No muriatic acid — Antiquing™ over a previously coated surface
Size
195 sq. ft.
Time
5 days
Before — faded, discolored, and still tacky from a bad sealer.After — stone-like depth in four colors.
“If you want to use the acid stain products on your concrete, DO NOT USE MURIATIC ACID TO CLEAN. We must have missed this advice when preparing to do this project. Fortunately, Direct Colors' Antiquing™ Stain saved the day! Since our porch was a smaller project, we were able to use multiple colors, and got amazing results… Who knew that watching Bob Ross painting shows would pay off some day?” — DIY Customer
A 15-year-old stamped walkway
Warm color and a gloss finish on a walkway that had simply gone flat with age.
Before — dull and faded, with visible wear.After — rich, warm Aztec Brown.
A two-tone driveway in Aztec Brown and Sunset Tan
Fifteen thousand square feet of broom-finished driveway and walkway: power-washed, the walking paths re-stained in a second color for contrast, then the whole surface sealed high-gloss.
Colors
Aztec Brown + Sunset Tan Antiquing™
Surface
Broom finish
Finish
High-gloss solvent-based sealer
Size
15,000 sq. ft.
Wide view of large concrete driveway finished with Aztec Brown and Sunset Tan Antiquing™ Stains, sealed to a high-gloss finish.Front entryway and garage featuring two-tone stained concrete in Aztec Brown and Sunset Tan with clean detailing and vibrant curb appeal.
Pro tip: “Get a quality sprayer for applying the sealer — it makes a big difference in speed and coverage.” — DIY Customer
Bold borders on a circle driveway
A 15-year-old driveway where the border, the circular centerpiece, and the half-moon pavers were stained in Aztec Brown Portico™ and sealed gloss, while the field got a satin coat of Goldenrod EasyTint™.
Colors
Aztec Brown Portico™ borders + Goldenrod EasyTint™ field
Finish
EasySeal™ Gloss on the borders, satin on the field
Other
Beige stabilizing sand
The Aztec Brown Portico™ accent detail.The finished driveway.
“I wanted to give my 15-year-old driveway a facelift, and Direct Colors made it happen… The result? A driveway that looks brand new and has some serious curb appeal. My only tip? Follow Direct Colors' instructions — they seriously know what they're doing.” — DIY Customer
A $1,300 saving on a cracked patio
The quote to repair, stain, and seal this stamped patio came in at $2,300. The owner tested colors with trial kits, patched the cracks, and did it themselves.
Color
Aztec Brown Antiquing™
Tested with
Trial kit: Aztec Brown, Cafe Royale, Driftwood
Prep
Patching compound on the cracks
Size
830 sq. ft.
Time
5 days
Before — prominent cracks and faded color.After — Aztec Brown Antiquing™ and EasySeal™.
“We got a quote for $2,300 to repair, stain, and seal our stamped concrete patio. With some effort and help from Direct Colors, we saved well over $1,300 doing it ourselves — and we're thrilled with how it turned out.” Tip: “Order more stain than you think you'll need — it's better to have extra than be stuck mid-project waiting on more product.” — DIY Customer
Aztec Brown under a Maple EasyTint™ top coat
This patio was stained Aztec Brown in 2023 and then sealed with a non-Direct Colors product that wore away inside a year. The fix was to refresh the Aztec Brown and top it with a tinted sealer instead of a clear one — color and protection in the same coat.
Before — the failed sealer, a year on.After — Aztec Brown with a Maple EasyTint™ top coat.
“Don't cut corners with sealer — it's what protects all your hard work. Direct Colors sealers are worth every penny.” — DIY Customer
A 30-year-old brick courtyard
Decades of fading on light-colored courtyard pavers, brought back with Aztec Brown and a water-based satin sealer.
Before — faded, aging pavers.After — revived in Aztec Brown, satin sealed.
Aztec Brown and Terracotta on 1,300 sq. ft.
Broom-finished driveway and sidewalk in two colors, sprayed and then back-rolled for an even finish.
The broom-finished driveway.The curved front walkway — both Portico™ Aztec Brown with Terracotta.
“Definitely apply two coats as suggested. I ended up spraying and then back-rolling with a roller to finish up 1,300 sq. ft. of driveway and sidewalk. The sealer turned out great and does exactly what it's supposed to. The tip on my sprayer was too small and didn't give a good spray pattern for the EasySeal Gloss.” Our tip: for EasySeal™ Gloss, use a sprayer tip between 0.015 and 0.019. — DIY Customer
You are eligible for free shipping.Spend $0.00 more to reach free shipping!
Product Comparison
Description
Price
Vendor
Type
Product variants
Choosing a selection results in a full page refresh.
Opens in a new window.
Before You Checkout
EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.
Before You Checkout
AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.
