ProWax Polish™
ProWax Polish™
- Show‑Stopping Shine: Delivers an ultra‑high‑gloss “wet‑look” that makes colors pop.
- Heavy‑Traffic Tough: Polymer formula resists scratches, scuffs, and daily wear.
- Rapid Drying: Light foot traffic in just 2 hours; furniture after 24 hours.
-
Hassle‑Free Maintenance: Recoat with a mop—no stripping required; buff for even higher gloss.
How much do I need to wax my concrete floor?
- It will depend on the square footage of your application and if this is the first applicaton or a subsequent one.
- The coverage rate is 1,000 square feet per gallon. (1 coat). For the first application after sealing, apply 2 to 3 thin coats.
Concrete Floor Wax Calculator
Amounts of coats:
Amount of ProWax Polish™ to use:
Your Recipe:
| Size | Qty |
|---|
Product Details
Product Details
ProWax Polish™ Gloss, engineered with an advanced water-based formula, delivers an unmatched, high-performance solution for floor finishing that guarantees maximum shine and prolonged durability. This product expertly combines synthetic high-gloss polymers, precision leveling agents, and fast-acting drying solvents to ensure a top-tier floor finish. At the core of ProWax Polish™ is a breakthrough polymer, scientifically developed to amplify your floor's brightness and extend its lifespan. This sophisticated formulation is specifically designed to prevent scratches, offering your floor an exceptionally durable wear life. Choose ProWax Polish™ for a floor finish that not only shines more brilliantly but also stands the test of time.
Specifications
Specifications
| Application Tools | Trim pad, foam mop with wringer attachment, or microfiber push mop. |
|---|---|
| Location | Suitable for interior surfaces only. |
| Re-Coat Time | 30 - 45 minutes. Dry times vary with environmental conditions. |
| Dry Time | 24 hours for foot traffic, varying with environmental conditions. |
| Cleanup | Use ProClean Degreaser™ and warm water. |
| Coverage | Approximately 500 sq. ft. per gallon for two thin coats, variable with surface conditions. |
| Application Temperature | Best between 60°F–95°F (15°C–35°C). |
| Recommended Uses | Ideal for sealed interior concrete floors. |
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
What is the difference between ProWax Polish™ High Gloss and ProWax Polish™ Satin?
What is the difference between ProWax Polish™ High Gloss and ProWax Polish™ Satin?
Both are acrylic-based floor waxes designed to protect your sealed concrete and enhance its appearance. The difference is in the finish: High Gloss produces a bright, mirror-like shine that intensifies color, while Satin provides a softer, more natural sheen. Choose based on your desired aesthetic and the look that complements your space.
How do I apply ProWax Polish™ High Gloss?
How do I apply ProWax Polish™ High Gloss?
Apply concrete floor wax with a trim pad or foam mop with a wringer attachment. Soak the applicator in warm water and shake or wring out excess before use. Pour the wax into a paint or wallpaper tray and saturate the applicator. Press out excess and push a thin, milky coat onto the surface. Apply no more than 3-4 thin coats at any time, allowing 2-3 hours of drying between coats.
Can I use ProWax Polish™ High Gloss on outdoor surfaces?
Can I use ProWax Polish™ High Gloss on outdoor surfaces?
No. Wax should not be used for outdoor surfaces. UV rays and rain break wax down too quickly, making it ineffective and potentially creating a slippery hazard. For outdoor surfaces, stick to acrylic sealers (AcquaSeal™ or EasySeal™) and reapply every 2-4 years as needed.
How often should I reapply ProWax Polish™ High Gloss?
How often should I reapply ProWax Polish™ High Gloss?
For residential use, reapply wax every 6-8 months depending on foot traffic. High-traffic areas like entryways and hallways may need more frequent spot treatments. For commercial applications, waxing may be needed more frequently. You can spot-wax high-traffic zones as needed between full applications.
Does wax replace the need for sealer?
Does wax replace the need for sealer?
No! Wax does not replace sealer. Sealer penetrates deep into the pores of your concrete, protecting the surface and maintaining your concrete's true color. Wax is a topical application designed to protect and enhance the finish of the sealer. Think of it as a protective layer on top of the sealer – the wax protects the sealer while the sealer protects the concrete.
Why are there white spots on my concrete after applying wax?
Why are there white spots on my concrete after applying wax?
Uneven Surface and Pooling: If the concrete surface is uneven with low spots, wax can pool in these areas when applied too heavily. This pooling can cause the wax to become milky or white, especially noticeable in rounded spots where the accumulation is significant. Moisture Trapped Under the Wax: Any remaining moisture on the surface or within the pores of the concrete that gets trapped under the wax layer can lead to a milky or hazy appearance. This moisture needs to evaporate completely; otherwise, as it tries to escape, it clouds the wax. Application on Cold Surfaces: Applying wax to a concrete surface that is below 60°F can prevent the wax from curing properly, leaving it white and milky—similar to its appearance when first applied. The wax doesn’t bond well with cold surfaces, resulting in an undesirable finish.
How can I prevent white spots from forming when waxing concrete?
How can I prevent white spots from forming when waxing concrete?
Ensure Even Application: Avoid applying wax too heavily, especially on uneven surfaces. Aim for a thin, even coat to prevent pooling. Dry the Surface Thoroughly: Make sure the concrete is completely dry, with no moisture on the surface or within its pores, before applying wax. Apply at the Right Temperature: Apply wax only when the concrete surface temperature is at or above 60°F. For optimal results, the wax should be within 5-7 degrees of the floor temperature during application.
What should I do if I already have white spots on my waxed concrete?
What should I do if I already have white spots on my waxed concrete?
Remove Excess Wax: In areas where wax has pooled, carefully remove the excess. This may involve reapplying a thinner layer of wax or using a wax stripper followed by a proper application. Address Moisture Issues: If moisture is the culprit, allow the area to dry thoroughly. This might mean using dehumidifiers or fans to speed up the drying process. Once dry, reapply the wax as recommended. Adjust Temperature: If possible, increase the temperature of the area to above 60°F and allow the surface to reach this temperature before reapplying wax.
How to Apply ProWax™ Polish
Explore our ProWax™ Polish, the perfect clear wax to protect your floors.
- Preparation
- Application
- Drying Times
- Maintenance & Safety
Product Videos
Technical Data Sheets
Before
After