Skip to content
FREE Shipping on Trial Kits

DCU

DCU

Browse by topic

    Concrete pigment chart rows for codes 112, 113 and 114 showing the same pigment at 1, 3 and 5 lb doses
    Integral Color

    Why Adding More Pigment Eventually Stops Making Concrete Darker

    Justin Richardson
    Concrete pigment color chart rows showing raw pigment beside cast samples at 1, 3 and 5 lb doses
    DIY

    How to Make and Approve a Concrete Pigment Test Panel

    Justin Richardson
    Person mixing dry cement and water in a large bucket to create a smooth concrete mixture for a DIY project
    DIY

    How to Mix Concrete Pigment Powder Without Streaks

    Justin Richardson
    Tweed Antiquing Stain used to even out two different concrete slab colors placed over two years. Ssealed with Solvent-based, Satin Acrylic Sealer
    DIY

    Make Your Old Concrete Patio Look Beautiful Again

    Justin Richardson
    A DIYer spray-applying acid stain wet-on-wet to a concrete floor, green and brown color pooling and blending across the slab
    Acid Stain

    How to Acid Stain Concrete: Test First, Then Stain

    Justin Richardson
    Concrete conctractor applying Sealer
    Maintenance

    Concrete Sealer Pro Playbook: Contractor System Guide

    Pablo Gonzalez
    Applying concrete sealer with a roller, the wet sealed strip darker than the dry gray concrete beside it
    How-To

    How to Apply Concrete Sealer: Step-by-Step Guide

    Justin Richardson
    Before and after of an interior concrete floor, bare gray on the left and a glossy near-black water-based stain on the right
    ColorWave

    ColorWave® Water-Based Concrete Stain: Project Gallery

    Justin Richardson
    Waxed concrete floor
    AcquaTint

    How to Apply AcquaTint™ Colored Concrete Sealer

    Justin Richardson
    How to Dye Concrete
    Basement Floors

    How to Apply Concrete Dye to Interior Floors

    Justin Richardson

    Before You Checkout

    EasyTint™ and OxiGrip™ are not compatible when used together directly. For slip resistance, use EasyTint™ as the color layer and apply OxiGrip™ only with a clear solvent based sealer as the topcoat.

    Before You Checkout

    AcquaTint™ and OxiGrip™ are not compatible when used together directly. If you need added slip resistance, apply AcquaTint™ as your color layer first, then use OxiGrip™ in a clear topcoat with AcquaSeal™ or HydroCryl™.