FREE Shipping on Orders Over $399
Product Search

$39.95

Financing available with . Learn more
  • Made for concrete pavers
  • Revives faded patio and driveway pavers
  • Traffic-tough color once sealed
White
White
Sepia
Sepia
Charcoal
Charcoal
Cinder
Cinder
Black
Black
Claystone
Claystone
Chestnut
Chestnut
Pyre
Pyre
Garnet
Garnet
Tobacco
Tobacco
Moss
Moss
Slate
Slate
You have chosen:
No color selected

  • EasySeal™ Solvent-Based, Gloss
  • AcquaSeal™ Water-Based, Gloss
  • EasySeal™ Solvent-Based, Satin
  • AcquaSeal™ Water-Based, Satin

Choose Quantity:


Product Tabs

Product Details

Choosing the right color for your concrete just got easier with our PaveWave™ Water-Based Paver Stain Trial Kit! Perfect for both beginners and professionals, this kit allows you to test out different color options on most paved concrete surfaces before you commit to a full-size purchase. It's a must-have because the final appearance of the stain can vary depending on your concrete's original color and condition. Our kit simplifies the process of finding the color that best suits your needs, enabling you to move forward with your project confidently.

When it comes to sealing, you've got options. EasySeal™, although a bit stronger in smell, enhances the richness of the color, perfect if you're aiming for a bold look. AcquaSeal™ is gentler on the senses yet still delivers a beautiful finish. Remember, applying the sealer is a crucial step—it's what brings the color to life and makes it pop. Skipping this step might leave you wondering where the color went, but once sealed, the true shades vividly emerge.

What's Included in the Kit:

    • For Staining: Three ColorWave® Stain colors (4-ounce each) plus three foam applicators for precise application.
    • For Sealing: Your choice of a satin or gloss acrylic sealer (4-ounce) and three foam applicator brushes (one for each color) for smooth, even coverage without cross-contamination.

Note: Kit components are non-returnable and non-refundable.

Quick Facts

  • Location: Suitable for both interior and exterior surfaces.
  • Dry Time: Allow a minimum of 4 - 12 hours drying time before applying the sealer.
  • Coverage: Each trial-size color can cover approximately 6 sq. ft., varying by surface condition.
  • Recommended Sealers: Compatible with both AcquaSeal™ Water-based and EasySeal™ Solvent-based Acrylic Sealer.
  • Application Temperature: For optimal results, apply between 60°F-95°F (15°C-35°C).
  • Important Note: Prevent freezing to maintain product effectiveness.

Special Offers

ColorWave® Stain & Seal Bundle

A package including one gallon of ColorWave® Stain and one gallon of sealer, ideal for small to medium projects.

ColorWave® Complete DIY Kit

This comprehensive kit is perfect for DIY enthusiasts, containing protective gear, cleaning supplies, a gallon of stain, application tools, and sealer.

ColorWave® Mega Bundle

A bulk deal offering five gallons of ColorWave® Stain and five gallons of sealer, suitable for large-scale projects or professional use.

How-To Guide

Preliminary Testing

Before using the product for your entire project, try it out on a small, hidden area of the surface you'll be working on. This will let you see how it looks and if it's the right fit for your project.

Pre-Application

Sound: Surface must be dry, structurally sound, and free of dirt or other materials.

Profiled: Conduct an absorption test to determine if the concrete is ready for staining. Pour water onto the surface and wait 3-5 minutes. If the water is not absorbed, clean and etch the surface using CitrusEtch™ to open the pores of the concrete. Refer to the CitrusEtch™ Technical Data Sheet for detailed instructions. If the water is absorbed, the surface is ready for PaveWave™ Water-Based Paver Stain application.

Clean: Thoroughly clean the surface to remove dust, dirt, oil, grease, paint, glue, sealers, curing agents, stamp tool releases, efflorescence, chemical contaminants, rust, algae, mildew, and other foreign matters that may interfere with the proper application of the stain.

Note on Porous Surfaces: Poorly finished, broomed, or very old surfaces may absorb PaveWave™more deeply, leading to less visible color.

Temperature: Apply PaveWave™in temperatures between 60°F (15°C) to 95°F (35°C).

Application

1. Mixing: Thoroughly mix PaveWave™ before application. For consistent color, combine contents from different jugs.

2. Work Area Planning: Divide the work area into manageable sections. Use natural breaks like walls and joints to your advantage. Be mindful of maintaining wet edges to reduce the appearance of overlap marks.

3. Preparation: Remove all filters from the pump-up sprayer hose to prevent clogging.

Hand showing filter removal from a pump-up sprayer
Removing the filter from a pump-up sprayer to prevent clogging.

4. Application Steps: Apply the product evenly. If spraying, use a circular overlapping motion. Use spiked shoes if you need to walk on the stained area. Start and stop the sprayer off the work area or into a bucket to prevent drips.

Basic Application: Apply 2 coats for a single color application to ensure even coverage and depth of color. Up to 4 coats can be applied for greater intensity and depth.

Combining Colors for Effects:

Drying Time Considerations: For a mottled design, proceed with subsequent coats without waiting. For a layered marbled design, allow each coat, especially the base color coat, to dry fully before applying the next to create distinct layers.

Limitations

  • Batch Variability: The supply of specialized pigments may vary between batches. To ensure color consistency, use the same batch for the entire job or mix multiple batches together (“boxing”).
  • Surface Characteristics: PaveWave™ Water-Based Paver Stain does not conceal discolorations, blemishes, cracks, or irregularities. It dries lighter than its wet appearance.
  • Sealant Requirement: PaveWave™ is not a sealant. A sealer is required for color enhancement.
  • Surface Compatibility: On hard-troweled surfaces, or surfaces where pores are smaller than the PaveWave™ particles, there's a risk of the stain drying on the surface without proper adhesion. Account for this during surface preparation.
  • Durability with Sealer: If a sealer is removed, PaveWave™ will also come off as it bonds with the sealer.
  • Color Accuracy: While efforts are made to accurately represent colors in product literature, photos, and sample color chips, the actual color achieved on concrete can significantly differ. This discrepancy stems from the stain's translucent nature, allowing the color of the concrete base to affect the final shade.

Slip Resistance

PaveWave™ does not affect slip resistance, which is determined by the chosen sealer. For enhanced slip-resistance on exterior surfaces, add OxiGrip™ to the sealer.

Sealing

Sealing is an essential step after applying PaveWave™ Water-Based Paver Stain. The stain itself penetrates the pores of the surface but does not form a permanent bond, meaning it can largely be washed off if not sealed. Without a protective sealant layer, the stain will not adhere effectively to the surface. Before proceeding with sealing, it's important to let PaveWave™ dry for approximately 4-12 hours, with the drying time varying based on the surrounding environmental conditions.

  • Choose between EasySeal™ Satin or AcquaSeal™ Satin. Both provide a satin finish that is less slippery compared to their gloss counterparts.
  • Keep in mind that EasySeal™, being solvent-based, generally enriches and darkens the stain color more than the water-based AcquaSeal™.
  • Gloss Finish Consideration: If using gloss finish sealers, which can make surfaces more slippery, consider adding OxiGrip™ slip-resistant additive to the second coat for enhanced safety.
  • If you choose to use EasySeal™ indoors, ensure there is sufficient ventilation to maintain good air quality.


Coverage

Estimated coverage is around 200 square feet per gallon, varying with surface conditions and application methods.

Clean-Up

Product Clean-Up
PaveWave™ Water-Based Paver Stain ProClean Degreaser™ and warm water
AcquaSeal™ Water-based Sealer ProClean Degreaser™ and warm water
EasySeal™ Solvent-based Sealer Xylene

Disposal

Dispose of unused product according to local environmental or hazardous waste regulations.

Shelf Life and Storage

Use PaveWave™ Water-Based Paver Stain within one year of purchase and store it in a cool, indoor location away from sunlight and heat.

Maintenance

  • Regularly inspect exterior sealed surfaces for wear and reapply sealer as needed.
  • For interior surfaces, monitor and maintain wax coatings or polish, especially in high-traffic areas.

Complementary Products

ProClean Degreaser™ Concrete cleaner & degreaser
EasySeal™ Solvent-based acrylic sealer
AcquaSeal™ Water-based acrylic sealer
OxiGrip™ Slip-resistant sealer additive

Safety & Precautions

CAUTION: Avoid contact with eyes and skin. Do not breathe vapors. Do not take internally. In case of eye contact, flush thoroughly with water. In case of skin contact, flush thoroughly with water. If swallowed, do not induce vomiting. Call physician immediately. KEEP OUT OF REACH OF CHILDREN.

Warranty

PaveWave™ is guaranteed for uniform quality within manufacturing tolerances. No warranty is provided for its application effects. Liability for defects is limited to refunding the purchase price. Users bear all other risks and liabilities. For inquiries, contact Direct Colors customer service.

Color Chart

PaveWave Water Based Paver Stain Color Chart

PDF Downloads

Customer Reviews:

Loading Reviews...

x

Shipping Estimate

Enter Shipping Address

We ship to United States, Canada and Puerto Rico

Estimate Shipping Address Entry

  • 2 Letter Code Only
  • Address Type

Estimate Shipping Submit Address