PaveWave™ 2-Step Paver Application System

Product Details

The PaveWave™ 2-Step Application System is a complete concrete paver stain kit that includes the two essential products needed to stain pavers from start to finish: 1 gallon of PaveWave™ Water-Based Paver Stain in your color choice and 1 gallon of matched sealer. Together, these cover approximately 200 square feet of standard exterior concrete pavers.

This is the most popular way to buy PaveWave™. Staining concrete pavers requires two chemically distinct products in matched quantities — and figuring out which sealer pairs with which stain and what coverage to expect from each is a barrier that keeps a lot of first-time users from getting professional results. The 2-Step System eliminates the guesswork. Pick your color, place one order, and you have everything you need to revitalize a patio, walkway, driveway, pool deck, or other 200 sq ft paver project.

PaveWave™ Water-Based Paver Stain is a semi-transparent, topical colorant developed specifically for concrete pavers and other rough, porous hardscapes. Using the natural porosity of pavers and their ability to absorb moisture, PaveWave™ infuses the surface with micronized pigments at a high pigment concentration, creating richer color saturation with fewer coats and without altering the underlying texture. The eco-friendly, zero-VOC formula delivers vibrant, variegated tones while maintaining control over color depth and placement. Although highly pigmented, this water-based stain remains easy to apply using a pump sprayer or roller, and its advanced polymer modification and high-quality pigments ensure durability and consistent color even on high-traffic exterior surfaces.

How to Use the 2-Step Application System

Test your pavers. Sprinkle water on the surface. If it absorbs within seconds, you're ready to stain. If it beads up, you need to etch with CitrusEtch first (sold separately).
Degrease the pavers with ProClean Degreaser (sold separately). Mix per the instructions, scrub, and rinse thoroughly. Allow the surface to dry completely before staining.
Apply PaveWave™ Stain with one of the included sprayers (a roller can also be used for tighter control over color placement). Work it into the porous surface evenly, building up to your desired color depth with additional coats as needed. Because of the high pigment concentration, fewer coats are typically required than with comparable water-based stains. Allow to dry completely between coats.
Allow the final coat to dry completely before sealing.
Seal with the included concrete sealer using the second sprayer. This is when the color pops and the surface is protected against weather, UV, and traffic.

PaveWave™ Stain MUST be sealed.

Full step-by-step instructions are included with the kit. For more detail, see the PaveWave™ How-To Guide

Specifications

Application Tools	Best applied using a pump sprayer (filter removed) or ⅜" nap roller.
Location	Specifically formulated for exterior paver surfaces such as patios, walkways, driveways and pool decks.
Dry Time	Requires 4 - 12 hours drying before sealer application.
Cleanup	Use ProClean Degreaser™ and warm water.
Coverage	Approximately 200 sq ft (18.6 m²) per gallon on average; actual coverage varies with paver porosity and texture.
Recommended Sealers	Compatible with AcquaSeal™ & HydroCryl™ Water-based Acrylic Sealers or EasySeal™ Solvent-based Acrylic Sealer.
Application Temperature	Best between 60°F–95°F (15°C–35°C).
Recommended Uses	Ideal for revitalizing concrete pavers on patios, driveways, pool surrounds, garden paths and other exterior hardscapes.
Important Note	PaveWave™ must be sealed to protect the pigment; do not allow the product to freeze during storage.

Items Included

Choice of Stain Color	PaveWave™ Paver Stain - 1 Gallon. Suitable for approx. 200 sq. ft., depending on surface conditions and application method.
Choice of Sealer*	HydroCryl™ Water-based Performance Sealer - 1 Gallon. Yields coverage for about 200 sq. ft.
Personal Protective Equipment (PPE)	Gloves, Safety Glasses
Cleaning Supplies	ProClean Degreaser™ Concentrate (1), Cleaning Cloths (1)
Staining Tools	Stain Pump-up Sprayer (1), Pair of Spiked Shoes.
Sealing Tools	Sealer Pump-up Sprayer (1)

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Save 15%

PaveWave™ 2-Step Paver Application System

SKU: DC-KIT-DIY-PVW-901-LIG-HGL-1GAL

$198.95

$198.95 ~~$235.95~~

Use:

1. Surface Prep2. Stain3. Seal4. Maintain

Everything you need to stain 200 sq ft — 1 gallon PaveWave™ Stain + 1 gallon HydroCryl™ water-based sealer, degreaser, 2 sprayers, spiked shoes, safety glasses, and cleaning cloth in one kit. A full low VOC kit with water-based and Eco-Friendly products.

Need help?

Talk to one of our concrete color experts.

How much do I need to stain my concrete?

It will depend on the square footage of your application.
The coverage rate is 200 square feet per gallon (2 coats) depending on concrete porosity. Two or more coats are required.

Concrete Stain Calculator

feet long by

feet wide

Amounts of coats:

Amount of PaveWave™ to use:

0.000

Your Recipe:

Size	Qty

Product Details

How to Use the 2-Step Application System

Test your pavers. Sprinkle water on the surface. If it absorbs within seconds, you're ready to stain. If it beads up, you need to etch with CitrusEtch first (sold separately).
Degrease the pavers with ProClean Degreaser (sold separately). Mix per the instructions, scrub, and rinse thoroughly. Allow the surface to dry completely before staining.
Apply PaveWave™ Stain with one of the included sprayers (a roller can also be used for tighter control over color placement). Work it into the porous surface evenly, building up to your desired color depth with additional coats as needed. Because of the high pigment concentration, fewer coats are typically required than with comparable water-based stains. Allow to dry completely between coats.
Allow the final coat to dry completely before sealing.
Seal with the included concrete sealer using the second sprayer. This is when the color pops and the surface is protected against weather, UV, and traffic.

PaveWave™ Stain MUST be sealed.

Full step-by-step instructions are included with the kit. For more detail, see the PaveWave™ How-To Guide

Specifications

Application Tools	Best applied using a pump sprayer (filter removed) or ⅜" nap roller.
Location	Specifically formulated for exterior paver surfaces such as patios, walkways, driveways and pool decks.
Dry Time	Requires 4 - 12 hours drying before sealer application.
Cleanup	Use ProClean Degreaser™ and warm water.
Coverage	Approximately 200 sq ft (18.6 m²) per gallon on average; actual coverage varies with paver porosity and texture.
Recommended Sealers	Compatible with AcquaSeal™ & HydroCryl™ Water-based Acrylic Sealers or EasySeal™ Solvent-based Acrylic Sealer.
Application Temperature	Best between 60°F–95°F (15°C–35°C).
Recommended Uses	Ideal for revitalizing concrete pavers on patios, driveways, pool surrounds, garden paths and other exterior hardscapes.
Important Note	PaveWave™ must be sealed to protect the pigment; do not allow the product to freeze during storage.

Items Included

Choice of Stain Color	PaveWave™ Paver Stain - 1 Gallon. Suitable for approx. 200 sq. ft., depending on surface conditions and application method.
Choice of Sealer*	HydroCryl™ Water-based Performance Sealer - 1 Gallon. Yields coverage for about 200 sq. ft.
Personal Protective Equipment (PPE)	Gloves, Safety Glasses
Cleaning Supplies	ProClean Degreaser™ Concentrate (1), Cleaning Cloths (1)
Staining Tools	Stain Pump-up Sprayer (1), Pair of Spiked Shoes.
Sealing Tools	Sealer Pump-up Sprayer (1)

Payment & Security

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

PaveWave™ 2-Step Paver Application System

$198.95

$198.95 ~~$235.95~~

Frequently Asked Questions

What is PaveWave™ and how does it differ from Portico™?

PaveWave™ is a water-based paver stain designed for coloring concrete pavers and outdoor concrete surfaces. While Portico™ is a solvent-based paver stain, PaveWave™ offers a water-based, low-VOC alternative with minimal odor. Both products use pigments that nest into the pores of the concrete surface and require sealing to hold the color in place.

Where can I apply PaveWave™?

PaveWave™ is designed for outdoor concrete surfaces including pavers, walkways, patios, driveways, and pool decks. It works well on porous and textured surfaces. As with all water-based products, the concrete must be clean, dry, and have adequate porosity for proper absorption.

Do I need to seal PaveWave™ after application?

Yes, sealing is required to preserve the pigment and protect the color from weather and foot traffic. Allow PaveWave™ to dry completely, then apply two thin coats of either AcquaSeal™ (water-based) or EasySeal™ (solvent-based) sealer. For outdoor surfaces, EasySeal™ is generally recommended for superior weather resistance.

What is the coverage rate for PaveWave™?

The coverage rate is approximately 200 square feet per gallon for two coats. Coverage may vary depending on the porosity, texture, and condition of your concrete surface. Highly porous or textured pavers may require more product. We recommend rounding up on supply needs to ensure you have enough for your full project.

How do I apply PaveWave™?

Apply PaveWave™ using a pump-up sprayer with the filter removed. Removing the filter is essential – if left in, the filter will trap the pigments and only the clear liquid will be sprayed. For smaller areas or detail work, a sponge or foam brush can also be used. Apply two coats for even coverage and allow adequate drying time between coats.