LookMatch™: Concrete Stain Ideas and Photo Matching
by Direct Colors Upload a photoWe’ll show you similar projects1,236 real projects
Driftwood patioAntiquing™
Seagrass dining roomEverStain™ + AcquaTint™Black Friday Deals15% offOn stain kits, bundles and sealersEnds Dec 2Shop the deals
Azure Blue patioDecoGel™ + EverStain™
Silver garageColorWave®
Aztec Brown drivewayPortico™ + EasyTint™
Light Charcoal basementAcquaTint™
Russet pool deckAntiquing™
Stone living roomColorWave®Guide
Acid-Stained Concrete Floors: How-To Guide
Cafe Royale walkwayPortico™
English Red commercialEverStain™
Crimson drivewayEasyTint™
Coffee Brown kitchenEverStain™
Silver Gray pool deckAntiquing™
Malayan Buff basementEverStain™
Cumin walkwayAntiquing™
Charcoal living roomAcquaTint™Guide
How to Stain a Concrete Basement Floor: DIY Guide
Terracotta drivewayAntiquing™
Desert Amber hallwayEverStain™
Milano Red patioAntiquing™
Navy bedroomColorWave®
Tan pool deckAntiquing™
Cola living roomEverStain™
Tweed walkwayAntiquing™
Gray patioAntiquing™Guide
Commercial Concrete Staining: Before & After ProjectsConcrete stain ideas from real projects
LookMatch™ is a free tool from Direct Colors for finding concrete stain ideas in more than 1,100 real projects by our customers: patios, driveways, pool decks, garage floors, basements, kitchens and more. Upload a photo of a look you like, describe it in a few words, or browse by space and color. Open any project to see the stains and sealers used and how it was done, then Shop the look works out the products for your area.
LookMatch™ shows real projects similar to your photo, never an exact match, and it isn’t a visualizer: it doesn’t paint a finish onto a picture of your floor. Every slab takes stain its own way, so test the color on a small area first. Not sure which product fits your concrete? A project coach can help: call (877) 255-2656.
How it works
- Find a look. Upload a photo, type a few words or filter by space and color. The closest real projects come first.
- See how it was done. Each project shows the stains and colors, the sealer and its finish, and the steps.
- Shop the look. Say where your project is and how big, and LookMatch™ builds the cart for your area.
Numbers to know before you start
- 28 days: let new concrete cure at least that long before you acid stain it with EverStain™.
- 3 to 5 minutes: sprinkle water on the slab and it should soak in within that time. If it beads up, stain can’t get in: start with surface preparation.
- 60°F to 95°F: for applying ColorWave® and AcquaTint™. AcquaSeal™ goes on a surface between 50°F and 95°F.
- About 200 sq ft per gallon: at two coats, for ColorWave®, AcquaTint™, AcquaSeal™ and HydroCryl™.
- 12 to 24 hours: how long ColorWave® dries before you seal it.
- 1 to 2 hours, 24 hours, 72 hours: AcquaSeal™ between coats, then normal use, then cars. Full cure takes 7 days.
- About 1,000 sq ft per gallon: each coat of ProWax™ Polish, indoors over a cured sealer.
These figures come from each product’s page at Direct Colors, linked above, and from the technical data sheets for EverStain™, ColorWave®, AcquaTint™ and ProWax™ Polish. The projects are our customers’ own.
Questions about LookMatch™
What is LookMatch™?
LookMatch™ is a free Direct Colors tool for finding concrete stain ideas in more than 1,100 real projects by our customers. Search by photo, by a few words, or by space and color, then see the stains and sealer each project used and shop the look for your area.
How does photo matching work?
Upload or paste a photo of a finish you like. LookMatch™ compares it with the photos of our customers’ projects and puts the closest looks first. Your photo is only used for that search; we don’t keep it.
Will I find an exact match?
No. LookMatch™ finds similar real projects, not an exact match. Stain reacts with each slab, so the same color can look different on two floors. Use the projects to choose a direction, then test the color on a small area of your own concrete.
Can I search without a photo?
Yes. Type a few words, like “brown patio” or “gray basement”, or use the Indoor, Outdoor and Garage tabs and the color filters.
What does each project show?
Photos of the finished project, and a before photo when we have one; the stains and colors used; the sealer and its finish; and the steps, with links to the products.
What does Shop the look do?
Tell it where the project is and how big it is. It takes the colors from the project and the right sealer for that space, then works out the lowest cost mix of Complete Kits, bundles and Contractor Systems for your area at today’s prices, ready to add to your cart.
Can I save or share a project?
Tap the heart to save a project to your Direct Colors account; you’ll be asked to log in or create one. The share icon gives you a link that opens that project.