Enter only the red text: By33A380Aq.
It will depend on the square footage of your application.
One kit has a coverage rate of 200 square feet per gallon (2 coats) depending on concrete porosity. Two or more coats are required.
Portico™ How-to Guide
EasySeal™ How-to Guide
AcquaSeal™ How-to Guide
Guía de Uso de Portico™ (español)
Guía de Uso de EasySeal™ (español)
Guía de Uso de AcquaSeal™ (español)
Guia de Uso do Portico™ (português)
Guia de Uso do EasySeal™ (português)
Guia de Uso do AcquaSeal™ (português)
Portico™ Safety Data Sheet
EasySeal™ Safety Data Sheet
AcquaSeal™ Safety Data Sheet
Step 1: Preparation
Step 2: Application
Coverage rate is approximately 200 square feet per gallon. Coverage rates may vary based on concrete texture, surface porosity, and application method.
NOTE: Only apply Portico™ Concrete Paver Stain when surface temperature is between 40 °F (4 °C) and 95 °F (35 °C).
CAUTION: Portico™ is flammable, harmful if swallowed, or inhaled. Keep away from heat, sparks, and flame. Store and use with adequate ventilation, allowing airflow to disperse vapors. Before applying Portico™, open windows and doors and extinguish all open flames such as gas appliance pilot lights, candles, etc. Do not smoke, use a lighter or matches, or anything that could cause a potential spark.
Step 3: Seal & Protect Finish
Tools & Supplies:
Disclaimer: Direct Colors does not warranty or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.
Direct Colors 430 East 10th St. Shawnee, OK 74801
10-5 Monday - Friday, Call Us Today (405) 275-6657 Email: [email protected]
Special promotions, product training, product releases, news and more!