My Cart: 0 item(s)


FREE Shipping Orders Over $75 (exclusions apply)
Product Search
Used two gallons chocolate to freshen up my 12 tear old ribbon on my driveway, sidewalk/porch. Pressure washed to prep and that was it. Applied at 4:1 ratio with stain and allowed to dry 5 hours and then reapplied 2nd gallon of stain. Waited 6 hours then applied 1st coat of solvent based satin sealer. Came back next morning and applied 2nd coat of sealer. Looks a little darker than I thought but overall looks much better. Will see how it holds up after a few years! Nice product.
Easy to apply. Applied the stain overexisting stamped and stained concrete driveway accent. It did not appear to enhance or color the concrete. However, once i applied the sealer the color popped and dried to an attractive antiqued finish that looks better than the original finish.
Excellent experience. Fast delivery
Correct color and delivered on time.
Great product. Easy to apply. Worked great.
Very easy to use. Dries fast. Be patient because it looks very dry until you seal it, then it comes to life! Our stamped concrete looked very orange and faded, so we wanted to "brown it down". We used Café Royal and gave the edges 2 coats to darken it more. My husband and I did it ourselves and it sure made us proud! We look like pro's!!!
worked as promised best concrete stain on the market. Finally a product that delivers on the promises they make. I bought a gallon to try and will be back for more and that's a promise.
Received the products very fast. Used the antiquing stain and the solvent based satin sealer to renew our patio and it looks great. Hoping it lasts this is the first time I have used this product.
Antiquing Concrete Stain

$0.00

  • 15% off sealer with purchase of stain
  • Stains stamped concrete and textured outdoor concrete
  • Can be applied to previously colored or dealed concrete
  • 200 sq. ft. of coverage per gallon

    Choose Quantity




    Product Tabs
    Direct Colors’ Antiquing Concrete Stain is our best selling exterior concrete coloring product. Easily add or restore color to previously stained concrete pathways, patio, and stamped concrete where color has faded. Our premium, spray-on formula applies directly on top of existing sealers and begins coloring concrete immediately.

    Quick Facts

    Application Tool: Pump sprayer
    Dry Time: 5-6 hours before applying exterior concrete sealer
    Cleanup: Mineral spirits
    Coverage: Aproximately 200 sq. ft. per gallon depending on concrete porosity
    Recommended Uses: Stamped concrete, rough concrete, previously sealed concrete surface



    Surface Preparation

    Use a Concrete Cleaner and Degreaser to clean and prepare your stamped concrete for staining. Paint, oil, and other materials on your stamped concrete won’t allow the stain to bond. So, in order to get the best result possible, these materials need to be cleaned from the surface. A Cleaner and Degreaser, used along with a Medium Bristle Scrub Brush, will easily remove any unwanted materials from your stamped concrete. Once the surface has been cleaned and swept free of dust and debris, let it dry completely before proceeding to apply the concrete antiquing stain.

    Applying The Antiquing Stain

    With any DIY project, safety should be your number one priority. When applying concrete antiquing stain or any concrete coloring product, it’s important to take precautions to ensure your safety, and the safety of those around you.

    Wear a Dust Mask and Safety Gloves to prevent fume inhalation and skin irritation from direct contact with the stain. The Dust Mask can also be used when sanding or evening out the concrete surface using a hand or machine trowel.

    Spiked Shoes should be used in concrete staining projects to prevent footprints and slipping when applying the antiquing stain. Concrete antiquing stains may take multiple layers to achieve the desired color. The spiked Shoes will allow you to walk across and around your project area without affecting your previous layer.

    Concrete Antiquing Stain is available in 29 unique colors. A gallon of concrete antiquing stain is enough to complete a 200 square foot project. This amount of stain accounts for multiple layers for you to achieve your desired color for your outdoor stamped concrete. Shake the bottle of concrete antiquing stain to activate the colorant. Open the lid and pour the antiquing stain into a Pump Up Sprayer.

    Shake the pump sprayer filled with concrete antiquing stain to activate the colorant. Use the pump to increase the pressure, and start spraying.

    NOTE: Spray the concrete antiquing stain in a corner of your project area to test.

    Spray the concrete antiquing stain in even layers across the entire concrete surface until you achieve a “wet” consistency. Be sure to shake the pump sprayer periodically to avoid clumping around the nozzle.

    Allow the final coat of concrete antiquing stain to dry for up to 6 hours before sealing.

    Sealing The Stamped Concrete

    Our Solvent-Based, Satin Acrylic Sealer is the perfect product to finish your concrete antiquing stain project. This sealer is perfect for outdoor concrete, is easy to apply, and highlights the underlying colors of your newly stained concrete pavers.

    To apply the Direct Colors’ Solvent-Based Satin Acrylic Sealer, first pour the product into a Sealer Pump Sprayer. Put on your Dust Mask, Safety Gloves and Spiked Shoes. Evenly apply two coats of sealer to your stamped concrete surface. Allow each coat of concrete sealer at least 6 hours to dry before applying second or third layers.

    Once the final coat of sealer has dried, you’re all done! Enjoy your newly concrete antiquing stained stamped concrete!

    Related:


    The Differences Between Concrete Stains, Dyes and Pigments
    The Best Stains for Indoor and Outdoor Concrete


    Note: As a made to order product, there are no refunds, exchanges, or returns.

    Due to DOT ORM-D Regulations this product can not be expedited and must be shipped Ground


    Customer Reviews:

    x