FREE Shipping Orders Over $199 (exclusions apply)
Product Search

My Cart: 0 item(s)


  • Color or restore faded concrete
  • Ideal for textured and stamped concrete
  • Can be applied to previously colored or sealed concrete
  • NOTE: Antiquing stain must be sealed after application. Otherwise, the final color will not show and the stain can be washed off
  • DIY Kits must be complete and unopened to be returned
Due to hazmat regulations, this product cannot be shipped via air

    How many kits should I purchase?

    It will depend on the square footage of your application.

    One kit has a coverage rate of 200 square feet per gallon (2 coats) depending on concrete porosity. Two or more coats are required.

    Your answer will appear here.

    Choose Quantity:

    Frequently Bought Together

    Product Tabs

    Product Details

    The Antiquing™ DIY Kit is the perfect solution for those looking to revive and protect their outdoor concrete surfaces on their own. Our kit includes everything you need to successfully stain and seal your stamped, broomed, or textured concrete surfaces, including a choice of color for the Antiquing™ Stain and a choice of solvent-based or water-based sealer in either gloss or satin finish. If you're not sure which color is best for your project, our Antiquing™ Stain Trial Kit is available to test out the various color options before committing to a full-size purchase.

    The Antiquing™ Stain is a semi-transparent formula that is easy to apply and suitable for a variety of exterior surfaces. It is perfect for restoring color to faded or discolored concrete, giving your outdoor living space a fresh, new look.

    The included sealer is designed to provide long-lasting protection and make your concrete surfaces easy to maintain. Whether you choose the gloss or satin finish, you can trust that your surfaces will be left looking beautiful and protected for years to come.

    With the Antiquing™ DIY Kit, you have everything you need to successfully revive and protect your outdoor concrete surfaces. All you need to do is follow the easy instructions and let the kit do the rest. So, it is a great value for those looking to both color and protect their stamped concrete on their own.

    DIY Kit Includes

    • PPE - Gloves, Safety Glasses
    • ProClean Degreaser Concentrate - 1
    • Cleaning Cloths - 1
    • Gallon Antiquing Stain Color - 1
    • Stain Pump Sprayer - 1
    • Pair of Spiked Shoes - 1
    • Gallon Acrylic Sealer - 1
    • Sealer Pump Sprayer - 1
    • Kit components are non-returnable & non-refundable
    Quick Facts

    • Application Tool: Pump Sprayer
    • Dry Time: 6-8 hours before applying sealer (sealer application is a required step)
    • Cleanup: Mineral Spirits
    • Coverage: Approximately 200 sq. depending on porosity
    • Sealer: EasySeal™ or AcquaSeal™
    • Recommended Uses: Concrete patios, driveways, pool decks, walkways or any textured, broomed or stamped concrete surface.

    Note: Since this is a made to-order-product, we cannot offer refunds, exchanges, or returns.
    Due to DOT-ORM-D regulations, this product cannot be expedited and can only be shipped by ground.

    Disclaimer: Direct Colors does not warrant or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.

    How-To Guide

    Printable Antiquing™ How-To Guide

    Printable ProClean Degreaser™ How-To Guide

    (Version en Español)

    (Versão em Português)

    Step 1: Preparation

    • Newly poured concrete must cure for 30 days before application.
    • Cover areas at risk of over-spray with plastic drop cloth.
    • For existing concrete:
      • Remove paint or previously applied sealer using Soy Gel Stripper.
      • Remove carpet glue or other adhesives using Bean-E-Doo® Mastic Remover.
      • Remove any oils, dirt, debris, Soy Gel Stripper, or Bean-E-Doo® Mastic Remover using scrub brush and ProClean Degreaser™.
    • Verify absorption by pouring a cup of water in various areas. If not absorbed within five minutes, etch the surface with CitrusEtch™, then neutralize surface with ProClean Neutralizer™ and rinse thoroughly.
    • Allow the concrete to thoroughly dry before application.

    Step 2: Application

    Coverage rate is approximately 200 square feet per gallon. Coverage rates may vary based on concrete texture, surface porosity, and application method.

    NOTE: Only apply Antiquing™ Stamped Concrete Stain when surface temperature is between 40 °F (4 °C) and 95 °F (35 °C).

    CAUTION: Antiquing™ is flammable, harmful if swallowed, or inhaled. Keep away from heat, sparks, and flame. Store and use with adequate ventilation, allowing airflow to disperse vapors. Before applying Antiquing™, open windows and doors and extinguish all open flames such as gas appliance pilot lights, candles, etc. Do not smoke, use a lighter or matches, or anything that could cause a potential spark.


    • Remove all filters from pump-up sprayer
    • Shake Antiquing™ well before pouring into sprayer.
    • Spray Antiquing™ on surface in slightly circular motions with irregular overlaps.
      • Shake sprayer tank from side to side often to prevent color from settling.
    • Allow to thoroughly dry for a minimum of eight hours before applying sealer.

    Pro Tips:

    • Begin spraying at a far corner to maintain a clear path to exit.
    • To avoid droplets dripping onto surface: before releasing sprayer trigger, immediately place tip in a bucket.

    Step 3: Seal 

    • Apply two thin coats of sealer (AcquaSeal™ Water-Based Acrylic Sealer or EasySeal™ Solvent-Based Acrylic Sealer).
    • For additional application instructions, see AcquaSeal™ and EasySeal™ for How-To Guides.


    • Clean tools and supplies with odorless mineral spirits


    • Protect finish every two years or as needed with either AcquaSeal™ Water-Based Acrylic Sealer or EasySeal™ Solvent- Based Acrylic Sealer.
    • For additional application instructions, see AcquaSeal™ and EasySeal™ for How-To Guides.

    Tools & Supplies:

    • Pump-up sprayer
    • Plastic drop cloth
    • Spiked shoes (if using CitrusEtch™)

    Disclaimer: Direct Colors does not warranty or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.

    How-To Videos

    Setting Up Pump Sprayer for Stain or Sealer Application
    Concrete Stain & Sealer Kit Calculator Help

    Color Chart

    Antiquing Color Chart

    PDF Downloads

    Customer Reviews:

    Loading Reviews...


    Shipping Estimate

    Estimate Shipping
    • Use 2 letter code