FREE Shipping Orders Over $199 (exclusions apply)
Product Search

My Cart: 0 item(s)


I have not actually used the product yet but was very impressed with the promptness of shipment. Thanks.
Helped me decide on a color to use on my carport.
I haven’t been able to apply it yet but I’m sure as with all the other products it’s gonna be a breeze
I'm interested in more of your products!
no
Good!

$39.95

Financing available with . Learn more
FREE SHIPPING
  • One-step stain & seal concrete solution
  • Ideal for outdoor concrete floors
  • Available in satin and high gloss finish
  • Trial Kits are non-returnable & non-refundable

  • Satin-Finish
  • Gloss-Finish
Black
Black
Charcoal
Charcoal
Light Charcoal
Light Charcoal
Gray
Gray
Silver Gray
Silver Gray
Buff
Buff
Sunset Tan
Sunset Tan
Tan
Tan
Khaki
Khaki
Tweed
Tweed
Yukon Gold
Yukon Gold
Cumin
Cumin
Goldenrod
Goldenrod
Cafe Royale
Cafe Royale
Maple
Maple
Driftwood
Driftwood
Chocolate
Chocolate
Aztec Brown
Aztec Brown
Auburn
Auburn
Plum
Plum
Cinnabar
Cinnabar
Milano Red
Milano Red
Crimson
Crimson
Russet
Russet
Terra Cotta
Terra Cotta
Pumpkin
Pumpkin
Wheat
Wheat
Olive
Olive
Fern Green
Fern Green
You have chosen:
No color selected

Choose Quantity:


Product Tabs

Product Details

EasyTint™ is a two-in-one stain and sealer, allowing you to quickly and easily color and seal concrete using just one product. 

Trial Kit Includes
  • Select 3 different colors out of 30 colors (4 oz each)
  • Foam Application Brushes (Qty 3)

Note: Since this is a made to-order-product, we cannot offer refunds, exchanges, or returns.
Due to DOT-ORM-D regulations, this product cannot be expedited and can only be shipped by ground.



concrete surface preparation

  • Before you start your project, put your dust mask on to avoid inhaling dust and debris
  • Sweep any debris from a larger concrete surface
  • Clean with an organic degreaser and rinse completely
  • Allow the concrete surface to dry completely
  • Once your concrete surface is properly cleaned and free of debris, you’re ready to apply tinted sealer

Applying EasyTint™

One of the best parts of a DIY Trial Kit from Direct Colors is just how easy the application process is. But, safety first.
  • Put your Dust Mask, Goggles, and Safety Gloves on. EasyTint™ can cause skin irritation, and damage your eyes if used improperly.
  • In your DIY Trial Kit, you’ll find 3 Sample Sized Bottles of EasyTint™ in shades of your choosing. Pick one or a few of your colors (if you choose to mix)
  • To apply the sealer, coat 1 of the 4 included Foam Application Brushes in the sealer. You can choose to add the sealer to a bowl and tip the brush from there, or keep it in the provided bottle.
  • Allow to dry for up to 24 hours.

And you’re done! For more information on concrete staining and to get ideas for your next concrete coloring project, visit our resource center.

How-To Guide


Printable EasyTint™ How-To Guide


Step 1: Preparation


  • Cover areas at risk of over-spray with plastic drop cloth
  • Newly poured concrete must cure for 30 days before application 
  • For existing concrete:
    • Remove paint or previously applied sealer using Soy Gel Stripper
    • Remove carpet glue or other adhesives using Bean-e-doo Mastic Remover
    • Remove oils, dirt, debris, Soy Gel Stripper, Bean-e-doo Mastic Remover, using a scrub brush and ProClean Degreaser™
  • Verify absorption by pouring a cup of a water in various areas. If not absorbed within 5 minutes, etch the surface with Hard Troweled Floor Pre-Treatment
  • Allow the concrete to thoroughly dry before Application


Step 2: Application


Coverage rate is approximately 200 square feet per gallon. Coverage rates may vary based on concrete texture, surface porosity, and application method.

NOTE: Only apply EasyTint when surface temperature is between 40 °F (4 °C) and 95 °F (35 °C).

CAUTION: EasyTint is flammable, harmful if swallowed, or inhaled. Keep away from heat, sparks and flame. Store and use with adequate ventilation, allowing airflow to disperse vapors. Before applying EasyTint, open windows and door and extinguish all open flames such as gas appliance pilot lights, candles, etc. Do not smoke, use a lighter or matches, or anything that could cause potential harm.

Option 1: Spraying (preferred method)
  • Remove all filters from Pump-Up Sprayer
  • Shake EasyTint™ well before pouring into sprayer
  • Begin spraying at a far corner to maintain a clear path to exit
  • Spray EasyTint™ on surface in slightly circular motions with irregular overlaps
    • Shake sprayer tank from side to side often to prevent color from settling
    • Spray thin coats to avoid puddling
  • Allow 8 hours before applying second coat (maximum of 2 thin coats)
    • Use a thumbnail to see if coat dents or scratches; if so, allow more time to cure
  • Apply a second coat following same method
Option 2: Rolling
  • Shake EasyTint™ well before pouring into paint tray
  • Use 3/8" nap roller to apply first thin coat and roll in one direction only
    • Do not apply pressure to roller as it this will cause streaking (let weight of roller do the work)
  • Allow 8 hours before applying second coat (maximum of 2 thin coats)
    • Use a thumbnail to see if coat dents or scratches; if so, allow more time to cure
  • Apply a second coat following same method

WAIT UNTIL CURED

  • 16 hours before foot traffic or placing heavy furniture
  • 32 hours before driving over surface or allowing parked vehicles

Step 3: Seal & Protect Finish

  • For exterior: Allow EasyTint to cure for 8 hours and then apply one thin coat of EasySeal
  • For interior: Allow EasyTint to cure for 72 hours and then apply thin coats of ProWax Polish
  • For additional application instructions see EasySeal™ and ProWax Polish™ How-To Guides

Pro Tips:

  • Begin spraying at a far corner to maintain a clear path to exit
  • If sealer is pooling or appears uneven, backroll with a 3/8" nap roller
    • Roller must be wetted in sealer and excess rung out before back rolling
  • To avoid droplets dripping onto surface, before releasing sprayer trigger immediately place tip in a bucket


Clean-Up:

  • Uncured EasyTint: Clean tools and supplies with Xylene
  • Cured EasyTint: Clean tools and supplies with SoyGel

Maintenance:


  • For exterior: Protect finish every 2 years with EasySeal™ or as needed
  • For interior: Protect finish every 2 years with ProWax Polish or spot treat high-traffic areas as needed
  • For additional application instructions see AcquaSeal™, EasySeal™ and ProWax Polish™ How-To Guides

Tools & Supplies:

  • Pump-up Spayer
  • 3/8" Nap Roller & Paint Tray
  • Plastic Drop Cloth
  • Scrub Brush
  • Spiked Shoes (if using Hard Troweled Floor Pre-Treatment)

Disclaimer: Direct Colors does not warrant or guarantee outcomes. Concrete variations or improper application may cause unintended results. test Products in an inconspicuous or small area and fully cure to ensure compatibility and desired result.

How-To Videos

Data Sheets

Color Chart

Customer Reviews:

x

Shipping Estimate

Estimate Shipping
  • Use 2 letter code