FREE Shipping Orders Over $199 (exclusions apply)
Product Search

My Cart: 0 item(s)


cccc '38471'

$0.00

Financing available with . Learn more
  • Luxurious Satin: Elegant sheen with extended durability.
  • Efficient Application: Advanced formula for a smooth, quick dry.
  • Scratch Resistance: Durable finish that protects against wear.

How much do I need to wax my concrete floor?

It will depend on the square footage of your application and if this is the first applicaton or a subsequent one.

The coverage rate is 1,000 square feet per gallon. (1 coat). For the first application after sealing, apply 2 to 3 thin coats.

Your answer will appear here.

Choose Quantity:


Product Tabs

Product Details

ProWax Polish™ Satin, engineered with an advanced water-based formula, delivers an unmatched, high-performance solution for floor finishing that offers a luxurious satin sheen and prolonged durability. This product expertly combines synthetic satin-finish polymers, precision leveling agents, and fast-acting drying solvents to ensure a premium floor finish. At the core of ProWax Polish™ is a breakthrough polymer, scientifically developed to enhance your floor's appearance and extend its lifespan. This sophisticated formulation is specifically designed to prevent scratches, offering your floor an exceptionally durable wear life. Choose ProWax Polish™ for a floor finish that not only presents a refined satin sheen but also stands the test of time.

Quick Facts

Application Tools: Trim pad, foam mop with wringer attachment, or microfiber push mop.
Location: Suitable for interior surfaces only.
Re-Coat Time: 1-3 hours. Dry times vary with environmental conditions.
Dry Time: 24 hours for foot traffic, varying with environmental conditions.
Cleanup: Use ProClean Degreaser™ and warm water.
Coverage: Approximately 500 sq. ft. per gallon for two thin coats, variable with surface conditions.
Application Temperature: Best between 60°F-95°F (15°C-35°C).
Recommended Uses: Ideal for sealed interior concrete floors.
Important Note: Prevent freezing to maintain product effectiveness.

FAQ

Click/Tap each question to hide/show the answers.

Why are there white spots on my concrete after applying wax?

  • Uneven Surface and Pooling: If the concrete surface is uneven with low spots, wax can pool in these areas when applied too heavily. This pooling can cause the wax to become milky or white, especially noticeable in rounded spots where the accumulation is significant.
  • Moisture Trapped Under the Wax: Any remaining moisture on the surface or within the pores of the concrete that gets trapped under the wax layer can lead to a milky or hazy appearance. This moisture needs to evaporate completely; otherwise, as it tries to escape, it clouds the wax.
  • Application on Cold Surfaces: Applying wax to a concrete surface that is below 60°F can prevent the wax from curing properly, leaving it white and milky—similar to its appearance when first applied. The wax doesn't bond well with cold surfaces, resulting in an undesirable finish.

How can I prevent white spots from forming when waxing concrete?

  • Ensure Even Application: Avoid applying wax too heavily, especially on uneven surfaces. Aim for a thin, even coat to prevent pooling.
  • Dry the Surface Thoroughly: Make sure the concrete is completely dry, with no moisture on the surface or within its pores, before applying wax.
  • Apply at the Right Temperature: Apply wax only when the concrete surface temperature is at or above 60°F. For optimal results, the wax should be within 5-7 degrees of the floor temperature during application.

What should I do if I already have white spots on my waxed concrete?

  • Remove Excess Wax: In areas where wax has pooled, carefully remove the excess. This may involve reapplying a thinner layer of wax or using a wax stripper followed by a proper application.
  • Address Moisture Issues: If moisture is the culprit, allow the area to dry thoroughly. This might mean using dehumidifiers or fans to speed up the drying process. Once dry, reapply the wax as recommended.
  • Adjust Temperature: If possible, increase the temperature of the area to above 60°F and allow the surface to reach this temperature before reapplying wax.

How-To Guide

Preliminary Testing

Before using the product for your entire project, try it out on a small, hidden area of the surface you'll be working on. This will let you see how it looks and if it's the right fit for your project.

Pre-Application

  • Clean the Surface: Sweep the floor to remove loose dirt and debris. Proceed to mop thoroughly, ensuring all dirt is removed. If old wax is present, it must be removed. The floor must be completely clean before proceeding.
  • Dry the Surface: After cleaning, the floor must be fully dry before applying the polish. If the floor was wet during the cleaning process, allow it to dry for 24 hours to ensure no moisture remains.
  • Reapplication on Previously Waxed Floors: For floors that have been previously waxed and now display a cloudy or hazy appearance, it's necessary to strip the floor. Use ProWax Polish™ Remover to eliminate old wax and finish thoroughly before reapplying wax. Refer to the ProWax Polish™ Remover Technical Data Sheet for detailed instructions.

Preparation

  • Always wear appropriate personal protective equipment as recommended in the Safety Data Sheet.
  • Protect surfaces not intended for polishing by covering surrounding areas to prevent accidental application.
  • Avoid using tape on concrete surfaces before or after waxing, as adhesives and plasticizers can interfere with ProWax Polish™'s effectiveness.

Tools for Application

  • Microfiber Push Mop: Efficient, thorough application on large surfaces.
  • Lamb’s Wool Mop: For large areas, smooth finish.
  • Trim Pad: Precise application in tight spaces.
  • Foam Mop with Wringer Attachment: Controlled application, easy excess removal.

Application

  • Apply ProWax Polish™ at a rate of roughly 500 ft2 per gallon for efficient coverage.
  • Dampen your applicator in warm water and wring out excess moisture before use.
  • Start application at a far corner of the area to maintain a clear exit path.
  • Wet the applicator in ProWax Polish™ and apply the first coat in one direction only.
  • Angle the applicator toward the inside edge to manage excess wax runoff.
  • Ensure a thin and even application, re-dipping the applicator in ProWax Polish™ as needed. Overlap each pass slightly until the entire floor is coated.
  • Maintain wet edges to minimize overlap marks.
  • Note: The wax may appear milky when applied but will dry clear.
  • Allow 1-3 hours between coats, with two thin coats recommended for best results.
  • Test the coat hardness with your thumbnail; if dents or scratches are visible, allow more curing time before applying additional coats.
  • Apply the second coat in the opposite direction, following the same steps.

Complementary Products

For optimal results and maintenance of your polished surfaces, consider using the following ProWax products:

Product Name Usage
ProClean Degreaser™ Concrete cleaner & degreaser
ProWax Polish™ Remover A powerful solution designed to strip old wax and finishes.

Safety & Precautions

CAUTION: EYE & SKIN IRRITANT. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. KEEP OUT OF REACH OF CHILDREN. Wear safety glasses and chemical resistant gloves.  Contains: Zinc ammonium carbonate and Ethoxylated alcohols. FIRST AID TREATMENT: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If breathed in, move person into fresh air.

Warranty

ProWax Polish™, a proprietary product, is guaranteed to maintain uniform quality within the bounds of manufacturing tolerances. However, as we have no control over its application, no explicit or implied warranty is provided concerning the effects of such use. In the event of a proven defect, our liability is strictly limited to refunding the purchase price of the defective material. The user is responsible for all other risks and liabilities that may arise from the use of this product. For any inquiries, please reach out to Direct Colors customer service.

How-To Videos

ProWax Polish™ How-to Video
ProWax Polish™ Calculator Help

PDF Downloads

Customer Reviews:

Loading Reviews...

x

Shipping Estimate

Enter Shipping Address

We ship to United States, Canada and Puerto Rico

Estimate Shipping Address Entry

  • 2 Letter Code Only
  • Address Type

Estimate Shipping Submit Address