Enter only the red text: By33A380Aq.
It will depend on the square footage of your application.
The acetone mixed with dye coverage rate is 150 square feet per gallon = (2-3 thin coats).
Disclaimer: Direct Colors does not warrant or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.
Click/Tap each question to hide/show the answers.
Vibrance™ Dye Color Chart
Vibrance™ Dye How-to Guide
Vibrance™ Dye Safety Data Sheet
Coverage rate is approximately 150 square feet per gallon. Coverage rates may vary based on concrete texture, surface porosity, and application method.
NOTE: Only apply Vibrance™ when surface temperature is between 40 °F (4 °C) and 95 °F (35 °C).
CAUTION: Acetone is extremely flammable, harmful if swallowed, or inhaled. Keep away from heat, sparks, and flame. Store and use with adequate ventilation, allowing airflow to disperse vapors. Before applying Vibrance™, open windows and doors and extinguish all open flames such as gas appliance pilot lights, candles, etc. Do not smoke, use a lighter or matches, or anything that could cause a potential spark.
Step 1: Preparation
Step 2: Application
Step 3: Seal & Protect Finish
Tools & Supplies:
Disclaimer: Direct Colors does not warranty or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.
Direct Colors 430 East 10th St. Shawnee, OK 74801
10-5 Monday - Friday, Call Us Today (405) 275-6657 Email: [email protected]
Special promotions, product training, product releases, news and more!